|
[China]
Trade Verify
Address: No. 1, Keyuan Road, Baiyun District, Guangzhou,Guangdong,,China
Contact name:Vivi
Guangzhou Guomat Air Spring Co., Ltd. |
|
Verified Suppliers
|
|
|
Convoluted Air Spring Firestone W01-358-8025 W01-358-8038 Contitech
FT 330-29 469 Rubber Triple Air Bag
Specifications and Tecnical Parameters: 3B8025
1. Min. Height:117mm
2. Max. Height: 460mm
3. Max. OD: 330mm
4. Top plate mounting thread: Single Combo Stud and 1pcs threaded
hole
5. The screw center distance: 140mm
6. Bottom plate mounting threads: 2pcs
7. The screw center distance: 157mm
8. Top plate diameter: 231mm
9. Bottom plate diameter: 231mm
10. Bumper: Yes
11. Girdle hoop: two pieces
Cross Reference
Brand | OEM No. reference |
Firestone | W01-358-8025; W013588025; W01 358 8025 WO1-358-8025; WO13588025; WO1 358 8025 W01-358-8038; W013588038; W01 358 8038 WO1-358-8038; WO13588038; WO1 358 8038 |
| Contitech | FT 330-29 469; FT 330-29469; FT 33029469 FT330-29 469; FT330-29469; FT33029469 |
| Goodyear | 3B12-300; 3B12 300; 3B12300 |
| Triangle | 6334; 4469 |
| Silent Drive | |
| Van Raden |
Note : refer to W01-358-8028
Advantages of Guomat air spring
1. good material
2. effective shock absorption
3. On-site installation
4. Comfortable and stable
5. Long life
6. Reduce abnormal noise
How to indentify the air spring number
The air spring has two numbers, one is part number and the other is bellow number.
The easiest and fastest way to identify air springs is by the part number which normally located on the sticker on the top of the air bag.
If you don't know the part number, then you can measure it according to the following steps.
The first is to identify the bellows number, which is the first step in identifying any bag or air spring. The bellows are the rubber portion of the airbag, and this number will determine the ride height and weight capacity of that airbag. The bellows number is located on the rubber oval stamped into the rubber. All convoluted bags use will bead plates. It's the flat plates on the top and bottom of the bag. You need take note of any connection points or air fittings and measure the distance between them. It is also necessary to note the size of your air fitting as well as the diameter of the top plate. On the bottom plate, you'd take the same measurements, the diameter across the bottom plate, and the measurement between the screw or blind nut. Then a compressed height need to be measured. Remove any air from the bag and press it down by hand, measure the distance between the top and bottom plates, and compress. Also pay attention to whether the bag has an a bumper block/buffer. It's easy to determine if a bag has bumpers. The bag rocks when you compress it. On bags without bumpers, the plate will lie flat and you won't be able to shake it.
The picture of air spring/air bellow assy/air shocks/air balloon
