Home Companies Guangzhou Guomat Air Spring Co., Ltd.

M-90-3 Yokohama Air Bag Sealed Type Rubber Shock Absorber For Metal Stamping Equipment

Guangzhou Guomat Air Spring Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: No. 1, Keyuan Road, Baiyun District, Guangzhou,Guangdong,,China

Contact name:Vivi

Inquir Now

Guangzhou Guomat Air Spring Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

M-90-3 Yokohama Air Bag Sealed Type Rubber Shock Absorber For Metal Stamping Equipment

Country/Region china
City & Province guangzhou guangdong
Categories Other Rubber Products
InquireNow

Product Details

M-90-3 YOKOHAMA Sealed Type Rubber Shock Absorber For Metal Stamping Equipment

 

Quick details of MB-90-3 Replaces M-90-3 YOKOHAMA:

 

 

Net Weight:0.81 KG

 

Gross Weight:1.50 KG

 

Package Size:160mm*160mm*160mm

 

Compressed height:60mm


Maximum Height:110mm


Full stroke:50 mm

 

Working medium:water, air

Working pressure:< 0.7Mpa

Burst pressure:> 1.6Mpa

Endurance cycle:> 10"

Temperature:-35℃ ~+60℃




Detailed Parameter Table of M-90:

 

GUOMAT NO.ReMBerence No.Hight H(mm)Commonly Maximum Stroke(mm)The Largest Diameter When Compressed(mm)
Design High(mm)Maximum High(mm)Minimum Height(mm)
MB-90-3M-90-315222287±45160
MB-90-2M-90-29814358±30160
MB-90-1M90-17610646±30125


 

GUOMAT NO.Reference No.Standard Height,Internal Pressure 0.49 M pa When The General ValueUsing Maximum Internal Pressure (M pa)Internal Pressure (M pa)
Effective Area (Cm2)Volume(L)Load (K n)Dynamic Spring Parameters (N/Min)Vibration Frequency (Hz)
MB-90-3M-90-3791.43.9782.20.882.9-3.9
MB-90-2M-90-2790.853.91182.70.882.9-3.9
MB-90-1M90-163.50.53.11032.90.883.9-4.9



Description about M-90-3 used in Knuckle Type Presses:

The knuckle type presses, with the elbow joint as the transmission mechanism, the sliding block is moved to the lower part (called the lower dead point), and it is suitable for cold forging. There is also an elbow - type punch that combines connecting rod and elbow.

 

 

M-90-3 can fit for many kinds of Metal Stamping Equipment

M-90-3 air spring of the presses is divided into single, double, three, four and five. Punch the air spring mattress made from natural rubber after a series of process of rubber skin, use the making craft of the air spring on the punch than ordinary industrial air spring is much more complex, therefore, the cost will be higher, the price is a natural a lot higher than the other. There are stainless steel rings in the middle, stainless steel ring in the single layer, and a steel ring in the hyperbolic. M-90-3 threecurves contain two steel rings,The M-90-3 three curves contain two steel rings, and the fourth one contains three steel rings, and the fifth one contains four steel rings.

 




Hot Products

2B9-250 Goodyear Double Convoluted Suspension Air Springs 578923206 For BIN HOPPER AIRSUSTECH 2B6943 ...
Goodyear 2B9-253 Suspension Air Springs Bellows Watson&Chalin AS0119F For SWASH PLATE MOTOR ...
2B9-254 Suspension Air Springs Goodyear Leland Sc2126 For VIBRATING SCREEN AIRSUSTECH 2B6946 ...
160166H-2 Suspension Air Springs AIRSUSTECH With Max Dia. 175mm For Inflat-able 160166H-2 Technical ...
Suspension Air Springs AIRSUSTECH 3B2300 Triple Convolutions For PIPE INDEXING THREADING AIRSUSTECH ...
Contitech FT330-29 773 Suspension Air Springs Replaces by Goodyear 3B12-304 Contitech FT330-29 773 ...