W01-358-6945 Industrial Air Springs Gas-Filled NO. 20-2 Firestone Bellows

W01-358-6945 Industrial Air Springs Firestone Bellows NO. 20-2 For Heavy Vibrating Screen

AIRSUSTECH 2B6945 Cross OEM Original Equipment Manufacturer:

AIRSUSTECH 2B6945

AIRSUSTECH rubber bellows 2B20-2

Firestone: 6945

Firestone:W01-358-6945

Firestone:W01 358 6945
Firestone:W013586945

ContiTech:FD 200-25 427 1/4 NPT
ContiTech:FD 200 25 427 1/4 NPT
ContiTech:FD200 25 427 1/4 NPT
Goodyear:2B9-253

Goodyear:2B9 253

Goodyear:2B9253

Goodyear Bellows NO.:578-92-3-206

Goodyear Bellows NO.:578 92 3 206

Goodyear Bellows NO.:578923206

Triangle
Ridewell
Leland
Watson&Chalin
: W01-358-6945/20-2 : FD 200-25 427
: 2B9-253
: 578923206
: 6332/4427
: 1003586945C
: Sc2125
: AS0119F
: AS01451G

AIRSUSTECH 2B6291 Specifications and Detail Technical Parameters

 
❶Nut/blind nut
Top plate screw (nut) teeth: 2X1/2-16UNC
The screw center distance of the top cover plate: 89 mm
Screw (nut) teeth of the bottom cover plate: 2X3/8-16UNC
The screw center distance of the bottom cover plate: 89 mm
❷Air hole/air inlet/air fittings
Air hole/air inlet: 1/4 NPT
Screw center distance between air hole and nut: 44 mm
❸Cover plate
Top plate diameter: 160 mm
Diameter of the bottom cover: 160 mm
Bell rubber bellows
Maximum diameter of rubber bellows: 262 mm
Natural diameter of rubber bellows:240 mm
Working stroke: minimum 95 mm to maximum 325 mm
Maximum height: 325 mm
Minimum height: 95 mm
Stroke height: 230 mm
❺Bumper block/bumper block
No bumper block
❻Belt loop/Belt loop
There is a belt hoop: a belt hoop
 

AIRSUSTECH 2B6945 the same size as W01-358-6945 Industrial Air Springs product description:

The air spring shock absorber AIRSUSTECH 2B6945 the same size as W01-358-6945 Industrial Air Springs can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded

• In order to press the air spring shock absorber AIRSUSTECH 2B6945 the same size as W01-358-6945 Industrial Air Springs to the minimum height, a restoring force is required. Usually, this is achieved by applying a load

• The entire bearing surface of the upper and lower plates of the air spring shock absorber AIRSUSTECH 2B6945 the same size as W01-358-6945 Industrial Air Springs must be used to absorb the force

• Before disassembling the air spring shock absorber AIRSUSTECH 2B6945 the same size as W01-358-6945 Industrial Air Springs , the internal air must be released to prevent accidents and personal injury.

• During operation, the rubber air spring shock absorber AIRSUSTECH 2B6945 the same size as W01-358-6945 Industrial Air Springs shall not be in contact with other parts