|
[China]
Trade Verify
Address: No. 1, Keyuan Road, Baiyun District, Guangzhou,Guangdong,,China
Contact name:Vivi
Guangzhou Guomat Air Spring Co., Ltd. |
|
Verified Suppliers
|
|
|
Air Spring Model 245 Type F1 Code 93740 Pneumatic Actuator For High Temperature Equipment
AIRSUSTECH NO .: 2H250180 Cross OEM Original Equipment Manufacturer:
AIRSUSTECH 2H250180
AIRSUSTECH rubber bellows 2B250
Model:245
Type: F1
High Temp. code 90587
Specifications and Detail Technical Parameters
❶Nut/blind nut
Top plate screw (nut) teeth: 8XM10X1.5
The screw center distance of the top cover plate: 145 mm
Screw (nut) teeth of the bottom cover plate: 8XM10X1.5
The screw center distance of the bottom cover plate: 145 mm
❷Air hole/air inlet/air fittings
Air hole/air inlet:1 / 2
Screw center distance between air hole and nut: 72.5 mm
❸Cover plate
Top plate diameter: 183 mm
Diameter of the bottom cover:183 mm
Bell rubber bellows
Maximum diameter of rubber bellows: 270mm
Natural diameter of rubber bellows: 245 mm
Working stroke: minimum 85 mm to maximum 310 mm
Maximum height: 310mm
Minimum height: 85mm
Stroke height: 225mm
❺Bumper block/bumper block
No bumper block
❻Belt loop/Belt loop
There is a belt hoop: a belt hoop
AIRSUSTECH 2H250180 replaces Air Spring Model 245 Type F1 Code 90587 product description:
The air spring shock absorber AIRSUSTECH 2H250180 replaces Air Spring Model 245 Type F1 Code 90587 can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded
• In order to press the air spring shock absorber AIRSUSTECH 2H250180 replaces Air Spring Model 245 Type F1 Code 90587 to the minimum height, a restoring force is required. Usually, this is achieved by applying a load
• The entire bearing surface of the upper and lower plates of the air spring shock absorber AIRSUSTECH 2H250180 replaces Air Spring Model 245 Type F1 Code 90587 must be used to absorb the force
• Before disassembling the air spring shock absorber AIRSUSTECH 2H250180 replaces Air Spring Model 245 Type F1 Code 90587 , the internal air must be released to prevent accidents and personal injury.
• During operation, the rubber air spring shock absorber AIRSUSTECH 2H250180 replaces Air Spring Model 245 Type F1 Code 90587 shall not be in contact with other parts
