|
[China]
Trade Verify
Address: No. 1, Keyuan Road, Baiyun District, Guangzhou,Guangdong,,China
Contact name:Vivi
Guangzhou Guomat Air Spring Co., Ltd. |
|
Verified Suppliers
|
|
|
Air Spring 26 T26 84181 Cross FESTO EB-215-155 For Air Conditioning Base Damping
AIRSUSTECH 2B7894 Cross OEM Original Equipment Manufacturer:
AIRSUSTECH 2B12017-3/4
AIRSUSTECH rubber bellows 2B120
T2086660
ContiTech: 603 N
ContiTech:FD 120-17 1/4
ContiTech:FD120-17 1/4
ContiTech:FD12017 1/4
Goodyear:2B7-540
Goodyear:2B7540
Goodyear:2B7 540
Goodyear:578-92-3-202
Goodyear:578 92 3 202
Goodyear:578923202
Firestone: 0142
Firestone:W01-358-0142
Firestone:W01 358 0142
Firestone:W013580142
| BELLOW NO. | COMPLETE NO. |
| CONTITECH 603 N | BOSCH 822419042 |
| FIRESTONE FLEX 26 | CONTITECH FD120-17 |
| FIRESTONE W01 358 0142 | 2682 030000 |
| 26 | DUNLOP (FR) SO 8201 |
| PHOENIX 2B O7 R | FESTO EB-215-155 |
| AIRKRAFT 114050 | GOODYEAR 2B 7-540 |
| NORGREN PM/31082 (8x2) | |
| T26 84181 | |
| TAURUS KF 218 | |
| WEFORMA WBZ 300-E1 | |
| AIRKRAFT 113053 |
Specifications and Detail Technical Parameters
❶Nut/blind nut
Top plate screw (nut) teeth: 2XM8X1.5
The screw center distance of the top cover plate: 70 mm
Screw (nut) teeth of the bottom cover plate: 2XM8X1.5
The screw center distance of the bottom cover plate: 70 mm
❷Air hole/air inlet/air fittings
Air hole/air inlet: 3 / 4
Screw center distance between air hole and nut: 35mm
❸Cover plate
Top plate diameter: 135 mm
Diameter of the bottom cover:135 mm
Bell rubber bellows
Maximum diameter of rubber bellows: 215 mm
Natural diameter of rubber bellows: 190 mm
Working stroke: minimum 75 mm to maximum 230 mm
Maximum height: 230mm
Minimum height: 75mm
Stroke height: 155mm
❺Bumper block/bumper block
No bumper block
❻Belt loop/Belt loop
There is a belt hoop: a belt hoop
AIRSUSTECH 2B12017-3/4 replaces Air Spring 26 T26 84181 product description:
The air spring shock absorber AIRSUSTECH 2B12017-3/4 replaces Air Spring 26 T26 84181 can only push the bellows towards the workpiece, otherwise it must be equipped with a stroke limiter at the end of the stroke, otherwise the bellows will be overloaded
• In order to press the air spring shock absorber AIRSUSTECH 2B12017-3/4 replaces Air Spring 26 T26 84181 to the minimum height, a restoring force is required. Usually, this is achieved by applying a load
• The entire bearing surface of the upper and lower plates of the air spring shock absorber AIRSUSTECH 2B12017-3/4 replaces Air Spring 26 T26 84181 must be used to absorb the force
• Before disassembling the air spring shock absorber AIRSUSTECH 2B12017-3/4 replaces Air Spring 26 T26 84181 , the internal air must be released to prevent accidents and personal injury.
• During operation, the rubber air spring shock absorber AIRSUSTECH 2B12017-3/4 replaces Air Spring 26 T26 84181 shall not be in contact with other parts
