Guangzhou Guomat Air Spring Co., Ltd. |
Verified Suppliers
|
|
TORPRESS 110 Replacement Single Convoluted Industrial Air Springs With Flange
Cross Reference
TORPRESS 110
Specification and Technical Parameters
Convolutions | 1 |
Top plate screw | 6pcs×M8×1.25 |
Bottom Plate screw | 6pcs×M8×1.25 |
Flange | With |
Height | 120mm |
Rubber Bellow Diameter | 180mm |
The characteristics of air spring
(1) The elastic coefficient of the air spring is variable, and as
the applied load increases, the elastic coefficient also increases.
The air spring can design various effect curves to meet various
performance requirements because the air spring has a nonlinear
effect.
(2) The rubber body of the air spring is relatively light, and the
mass of the air is also very small. Most of the weight of the air
spring comes from the upper cover and the lower cover. Unlike the
steel spring, the metal mass is relatively heavy.
(3) The bearing capacity of the air spring can be adjusted
according to the inflation pressure in the rubber airbag. For the
same air spring, different bearing capacity requirements can be met
by adjusting the inflation pressure.
(4) Since the air spring uses air as the elastic medium, when
compressed, the internal friction is small, so the vibration
isolation effect is relatively good. In addition, air springs have
a good ability to cancel noise because air and rubber are
relatively weak in transmitting sound.
(5) The anti-fatigue ability of the air spring is relatively
strong. The experiment shows that the number of stress cycles that
the leaf spring can withstand under normal circumstances is 500,000
to 600,000 times, while the general air spring can reach about 3
million times. High-quality air The number of stress cycles that
the spring can withstand can reach more than 5 million times. Air
springs are therefore highly effective in resisting strain.
TORPRESS 110 other model
MODEL | STANDARD | Connection | Max | Min. | Max. Height mm |
110 | 93113 | P1 | 210 | 51 | 151 |
88540 | F1 | 210 | 45 | 145 | |
88820 | F1 | 210 | 45 | 145 |
MODEL | STANDARD | Static mm | Effec. cm² | Cap. daN | Freq. cycle/1’ | Stiffness daN/mm |
110 | 93113 | 101 | 180 | 1260 | 154 | 18.8 |
88540 | 95 | 180 | 1260 | 154 | 18.8 | |
88820 | 95 | 180 | 1260 | 154 | 18.8 |
The related picture of air spring/air shocks/air spring
assembly/air bag