99.9% Efficiency Stone Waste Gas Treatment Industrial Dust Collector

Stone Dust Collector Industrial Dust Collector Stone Waste Gas Treatment Bag Dust Removal Air Filtration For Hammer Mill

Product overview

Most of the cartridge dust collectors are used in the workplaces of the factory production workshops and those places with higher environmental requirements. Compared with the general dust collectors, the filter cartridge dust collectors are smaller in size and have less resistance to operation, so they work particularly well. The speed of operation is also large, and the work efficiency is good.

QD-ERPE series split-type cartridge dust collector has compact structure, reasonable design, large air exhaust volume, and can be placed indoors or outdoors.

The split-type cartridge dust collector and fan adopt split-type combination, which can be equipped with a variety of collection devices for large-scale welding, the smoke and dust from grinding and cutting.

We can design the best suitable smoke and dust collection system according to different site working condition.

Operating principle of dust collector

1. Under the action of the main fan of the system, the dust-containing gas enters the air box at the bottom of the dust collector from the ash hopper at the lower part of the dust collector or the air inlet of the side air duct of the box body for pretreatment of the dust-containing gas, and then enters from the bottom to the upper box body Each dust removal room;

2. Dust is adsorbed on the outer surface of the filter cartridge, and the filtered clean gas enters the clean air chamber in the upper box through the filter cartridge and is collected to the air outlet for discharge.

3. As the filtering conditions continue, the dust accumulated on the outer surface of the filter cartridge will accumulate, which will increase the operating resistance of the equipment accordingly. In order to ensure the normal operation of the system, the upper limit of the dust collector resistance should be maintained in the range of 1400~1600Pa When the limit is exceeded, the pulse automatic controller will issue instructions through fixed resistance or timing to automatically clean the dust.

Advantages

1. Newest pulse filter technology;

2. Customized filter bags materials to choosen;
 

3. Small size&light weight, easy to install and operate;
 

4. Could provide max 99.9% high working efficiency;

5. Used for construction site, minging, chemical, coating, painting, food industary, etcs.

Parameters

Related Photo

Contact me to get your OEM dust collector solution:

Application

QD-ERPE series multi-filter cartridges dust collector adopts advanced pleated filter cartridges as the filtration unit, can remove fine non-fibrous dust. Compared with the traditional pulse bag filter, the machine has the advantages of small size, large filter area, high dust removal efficiency, low pressure loss, reliable operation and long service life. It is widely used for dust control and recovery in mechanical processing, foundry, chemical industry, ceramics, brake material processing, powder spraying and welding dust purification. After dust treatment, it meets the national emission standards and is a new form of pulse dust collector.