|
[China]
Trade Verify
Address: 528225, No 7, B Area Shishan Town ( Industrial Park), Nanhai District, Foshan City, Guangdong Province, China.
Contact name:Joanna Bao
OURUIDA CO.,LTD |
|
Verified Suppliers
|
|
|
HF-15KW IGBT High Frequency Induction Heater For All metal Heating, Quenching, Hot Forging, Welding/Soldering /Melting
1 Main characteristics:
1 Infineon IGBT module and Inverting technologies of third
generation been used; Higher reliability and lower maintenance
cost.
2 100% Duty cycle, continuous working is allowed at maximum power
output.
3 Simple to install, Installation can be done by unprofessional
person very easily;
4 Double digital Screen display, better to know the working performance of the machine!
5 100% Duty cycle, continuous working is allowed at maximum power output.
6 High Efficiency Up to 98%.
7 Energy Saving Up to 20-30% compare with SCR machine.
8 Diode Rectification Technology Make sure high power factory—0.98.
9 Soft Switch Technology And prefect Protection system( Over Heat,
Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water)
enhance Good Reliability.
10 Display of heating power, Power%, Current, Voltage, oscillating
frequency.
11 Light weight, small Size
12) Transformer Ratios can connect different Induction coils,Work different workpiece.
13) Large working application, annealing, quenching/Hardening, Hot Forging, Heating Treatment, Soldering/Welding/Brazing and melting.
2 Parameter
| Type | HF-15A(KW) | ||
| Work power | 220V Simple Phase or 3×380V(415V,440V,480V)50-60HZ | ||
| The range of operating voltage | 340V-430V(370-480)V AC
| ||
| Output Fluctuating power | 15KW | ||
| Fluctuating frequency | 30-80KHZ | ||
| Max Input Current | 15A | ||
Timing (Heat time, Retain time , Cool time) | 1-99S | ||
| The flow rate of cooling water | 0.08-0.16 Mpa 12L/Min | ||
| Water temperature protection point | 40℃ | ||
| Duty cycle | 100%(40degree room temperature) | ||
Weight And Size | Net | 600*230*480MM 28KGS | |
| With Package | 690*350*690MM 38KGS | ||
Applications: Heat treatment Quenching Forging Melting Soldering and brazing Welding | |||
Application:
Pre-sale service:
1. recommend the most suitable machine for customers, according to
their requirements.
2. Inquiry and consulting support.
3. Sample testing support.
4. View our Factory.
In-sale service:
1. Strictly manufacture the machine, according to relevant
technical standards.
2. Take run test, according to relevant equipment test run
regulations.
3. Strictly check up the machine, before delivery
4. Delivery on time.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering,
12months from date of receiving.
2. Within warranty all parts are free for customer, any fault
caused by non artificial reason, any quality problems such as
design,
manufacture, or procedure occurs, We shall provide replacement
parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period,
we will send maintenance
technician to provide visiting service after checking with the
customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the
materials and spare parts used in system operation, equipment
maintenance.
6. The above mentioned are only basic aftersale service
requirements,we will make more promises related to quality
assurance and operation guarantee.
Working Shop:
Package:
