Shaft Rolls Assembly Disassembly 90A Induction Heating Machine For Forging

Shaft Rolls Assembly and Disassembly 90A Medium Frequency Induction Heating Machine

Main Features:

1. Low Frequency good for metal's hot forging, melting. Fast Speed heating and melting.

2.  Preheat, heat assembly and disassembly for shaft roll into the shaft sleeves. 

3. Can connect big induction coils to work. 

4. Infineon IGBT and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
5. 100% Duty cycle, continuous working is allowed at maximum power output.
6. Simple to install, Installation can be done by unprofessional person very easily;

7. Energy Saving Up to 20-30% compare with SCR machine.

8. Diode Rectification Technology Make sure high power factory—0.98.

9. Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.

10. The machine has the Isolation Transfromer, will be very safe operate our machine.  

Technical Parameters 

Application

Heating (hot forging, hot fitting and smelting):

1 Hot forging aims to fabricate the work pieces of certain temperature (different materials require different temperatures) into other shapes through forging press with the help of punch press, forging machine or other equipments, for instances, hot extrusion of watch case, watch flan, handle, mold accessory, kitchen and table ware, art ware, standard part, fastener, fabricated mechanical part, bronze lock, rivet, steel pin and pin.

2. Hot fitting refers to the connection of different metals or metals with nonmetals through the heating based on the principle of hot expansion or hot smelting, for instances, embedded welding of copper core of computer radiator with aluminum sheet and speaker web, compound of steel and plastic tube, sealing of aluminum foil (tooth paste peel), motor rotor and sealing of tubular electric heating element.

3. Smelting mainly aims to melt the metal into liquid by using the high temperature, which is mainly applicable to the smelting of iron, steel, copper, aluminum, zinc as well as various noble metals.

Advantage:
1.More than 22 years experience, stable and goods performance! 
2.CE,SGS, TUV,ROSH certificated
3. Infineon IGBT Machine, Saving 20-30% electricity compare with SCR type. 
4.Suitable for a large range, heating, quenching, forging, melting, soldering and so on.
5. Non-contact induction heating, no flame,less environment pollution, Environmental protection and energy saving products.
6. High efficiency,high output&high reliability
7. Small size &light weight

Working Principle: (What is induction heating? How does induction heating work?)
During induction heating eddy currents are induced in an electrically conductive metallic workpiece by an alternating electromagnetic field. These are converted into heat by magnetic loss. - Or, simply put, the metal heats up due to the current flow produced in the workpiece. This enables induction heating to introduce heat directly into the workpiece rather than through connectivity from an external source such as heating with a flame or in a furnace. This process thus achieves a very high degree of efficiency. Additionally, heating can also be accomplished passing through non-conductive materials. The surrounding area is only heated indirectly.