OURUIDA CO.,LTD |
Verified Suppliers
|
|
100-250Khz UF-60KW UtraHigh Frequency Induction Heating Machine
Features:
1.This equipment adopts the IGBT inverter circuit, which has high
load adaptability.
2. it has such features as high frequency, fast heating speed, high
efficiency and easy operation.
3. As compared with other heating modes, it can significantly
promote the economic benefits, improve the quality of heated work
pieces and save the energy and material, alleviate labor intensity
and improve the production environment
4. It has super small size, which can save the production space by
10 times
5. It is safe and reliable, and requires no equipment of ten
thousand voltage, and thus can ensure the safe operation
6. The comprehensive full load design is available for 24-hour
continuous operation.
2 Parameter
Type | UF-60KW |
Work power | 380-480V *3Phase 50-60hz |
Output power | 60KW |
Input current | 90A |
Heating Current | 15-145A |
Fluctuating frequency | 100-250KHZ |
The flow rate of cooling water | >0.2Mpa 9L/MIN |
Water temperature protection point | 40℃ |
Duty cycle | 100%(40degree room temperature) |
Weight | 50KGS 42KGS |
Size | 65×35×55 CM |
Application:
1. Hardware tools high-frequency hardening heat treatment, such as;
vise, hammer, locking pliers, wrenches, screwdrivers
2. Variety of steam, motorcycle parts high-frequency hardening heat
treatment, such as: crankshaft, connecting rod, piston pin,
camshaft, valves, various gears within the gearbox, a variety of
fork, all kinds of spine shaft, drive axle, each high-frequency
hardening heat treatment of the kinds of small shafts, crank pin,
rocker arm, rocker shaft.
3. Hydraulic components, such as: a rotor of the plunger piston
pump, rotor pump, various valves on the other to the heat treatment
of high-frequency hardening of the shaft, the gear pump gears, etc.
4. Automotive, machinery and equipment, electric tools, gear,
bearing high-frequency hardening heat treatment
5. Variety of woodworking tools, such as: ax, planer quenching
Wheels of a variety of automotive, motorcycle, marine and engineering equipment, machine axis IF quenching, large parts of the annealing, tempering and stress relieving.
Advantage of the Induction Heating Machine:
1. More than 22 years experiences, high quality control, stable performance.
2. CE Certificated
3. Energy Saving Up to 20-30% compare with SCR machine.
4. Diode Rectification Technology Make sure high power factory—0.98.
5 Soft Switch Technology And prefect Protection system( Over Heat,
Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water)
enhance Good Reliability.
After-sale service:
1. Warranty time: Within 18 months from the date of delivering,
12months from date of receiving.
2. Within warranty all parts are free for customer, any fault
caused by non artificial reason, any quality problems such as
design,
manufacture, or procedure occurs, We shall provide replacement
parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period,
we will send maintenance
technician to provide visiting service after checking with the
customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the
materials and spare parts used in system operation, equipment
maintenance.
6. The above mentioned are only basic aftersale service
requirements,we will make more promises related to quality
assurance and operation guarantee.