DSP-200KW Air Cooled Induction Heating Machine For PWHT Heating Assembly Disassembly

DSP-200KW Air Cooled Induction Heating Machine For PWHT , Preheat, Heating Assembly And Disassembly

Features:

1. Front Panel use the LCD Touch Screen, Key and Power Switch, all digital display, can use Switch Signal( Electrical frequency signal) to control the machine start and stop, and control the power via PLC.

Visual Human-computer Interface makes the operator feel more intimate and intuitive.

2. Induction Heating Machine have remote control function and adopt digital circuit control, power regulation can be adjusted from 1% to 100% resolution, and digital PID temperature control module can be configured to set the target temperature of workpiece (infrared temperature measurement automatically)

3. There are 5 working model, manual, timer, Fixed temperature, Constant temperature, section heating model.

1) Manual, On and stop in the Switch

2 ) Fixed Timer, setting heating time, after reach the heating time, then stop.

3) Fixed Temperature: Set the heating temperature that we need it, when the reach to the temperature that we need it, then stop the machine.

4) Constant Temperature: Adjust the heating power automatic to keep the same temperature to the workpiece.

5) Section Heating model, there are 8(S1-S8) options, each section can set the heating power, timer, temperature or constant temperature, temperature or constant temperature just can choose any one. Power as 0 means no need to heat, put theParamater that you need to set, if not choose that function then show"--

4.This machine has Memory Storage Function, There are 9 (P1-P9)programs, which can memorize 9 different workpiece in the machine, and select programs by clicking P(P1-P9). Can save much time if you have many workpiece in one machine, you can choose the programs (P1-P9) to fast working.

5. Infineon module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
6. 100% Duty cycle, continuous working is allowed at maximum power output.
7.Simple to install, Installation can be done by unprofessional person very easily;

8. Energy Saving Up to 20-30% compare with SCR machine.

9. Light weight, small Size

Technical Parameters: 

Application:

Preheating before welding, hydrogen elimination after welding, stress relief heat treatment, heat jacket heat removal, diathermy, hot forging, etc

Application Industries: Nuclear power, military, marine, chemical, power construction, vehicles, engineering machinery, pressure vessels, scientific research.

Advantage:

1. Easy to operate, can programme

2. High Waterproof.

3. Can bear high temperature, allow the max environment temperature reach to 180C.

4. High safety.

5. Full digital

6. Anti-interference.

Control Function:

Main wire Switch

Main Part Switch

Remote Switch

System safety Protection

Phase protection

Timmer Switch

Over-heating protection

Over-voltage protection

Over-current Protection

Phase Fail Protection

Power can programme

Display function:

Temperature Checking Display

Time setting Display

Working Model Display

Working state display

Failure inquire display