|
[China]
Trade Verify
Address: 101, Building 28, No. 16 Jin'an Road, Xiangcheng District, Zhangzhou City, Fujian Province
Contact name:Susan
Zhangzhou Tianrong Machinery Co., Ltd. |
|
Verified Suppliers
|
|
|
Pinless Hammer Composite Repair Air Tools 3/4 (1) Inch Pneumatic Impact Wrench
| Item | Square | Free speed (r.p.m) | Max torque (N.m) | Hammer mechanism | Air inlet | Anvil length | Bolt capacity | Air pressure | N.W |
| TR-770 | 3/4" orl” | 4800 | 1880 | Twin hammer or pin less Hammer | 3/8" | 1.5〃 | M28 | 90 PSI | 5.75kg |
| TR-736 | 1〃 | 4000 | 3000 | Twin hammer | 1/2” | 6" or 8" | M38 | 90 PSI | 12.4kg |
The usage method of pneumatic wrench is as follows: 1. Adjust the gas pressure to control the torque size, in order to allow specific torque requirements to be set; 2. The pneumatic torque wrench can be combined with a torque sensor to make the output torque more accurate; 3. After obtaining the required torque, a suitable circuit system can be used to manually or automatically turn off the air supply. Pneumatic wrench is a handheld rotating pneumatic tool that can accurately set torque for locking or disassembling nuts and bolts. The control part is achieved through a voltage regulator and power management system. It has small size, light weight, high output power per unit weight, and can achieve advantages such as high torque output, low reaction force, and low environmental pollution.
FAQ
Q1: What's your product line?
A: professional air impact wrench ;industrial grade tighten tool,
lubrication equipment;Screw air compressor air end, Screw
aircompressor .
Q2: Can you provide samples?
A: Yes. Customers can buy samples from us.
Q3:Are there any discounts for large orders?
A: Of course. According to different quantities.
Q4: How soon will the order be completed and shipped?
A: The lead time is about 30-35 days based on your quantity. After
the transaction order is completed, we usually complete the
delivery time 30days . If the order volume is large on holidays or
activities. There will be a little delay.
Q5 : Can we put our logo on our products? Is there any extra cost
for it?
A: Yes, we can do OEM for customers. Logo sticker/laser/engraving
are possible. Different ways different costs. We can discuss
details.
Q6: How about your quality control?
A: All of our products are 100% tested before shipment.
Q7: Do you have a warranty policy?
A: If there is any quality problem of the product, you can take
photos and videos to us, and our QC will serve you in time. If
it's a product design defect, we can provide some repair parts for
free in your next mass order. Your satisfaction is our commitment!
Q8: What's your payment terms?
A:We accept T/T or L/C.
Q9: What’s your certification?
A: Most of our products passed the CE test.
