Home Companies IMAX Power Technology Co.,Ltd

150W 12V ACDC Power Supply 305VAC Input Industrial control application High Reliability

Active Member

Contact Us

[China]

Address: 5th Floor, Building B10, Fuqiao 2nd Industrial Zone, Fuhai Street, Bao'an District, Shenzhen

Contact name:Coco

IMAX Power Technology Co.,Ltd

150W 12V ACDC Power Supply 305VAC Input Industrial control application High Reliability

Country/Region	china
City & Province	shenzhen
Categories	Electrical Plugs & Sockets

Product Details

150W Enclosed Ac Dc Power Supply industrial control power supply

Descriptions

LM150-20Bxx series is one of Mornsun’s enclosed AC-DC switching power supply.It features universal AC input and at the same time accepts DC input voltage,cost-effective,low no load power consumption,high efficiency,high reliability and double or reinforced insulation.These converters offer excellent EMC performance and meet IEC/EN61000-4,CISPR32/EN55032,IEC/EN/UL62368,EN60335,GB4943 standards and they are widely used in areas of industrial,LED,street light control,electricity,security,telecommunications,smart home etc.

Features

Universal 85 - 264VAC or 120 - 370VDC Input voltage

Accepts AC or DC input (dual-use of same terminal)

Operating ambient temperature range: -30℃ to +70℃

Low standby power consumption, high efficiency

High I/O isolation test voltage up to 4000VAC

Low ripple & noise

Output short circuit, over-current, over-voltage, over-temperature protection

IEC/EN/UL62368, EN60335, EN61558, GB4943 safety

Over-voltage class Ⅲ (designed to meet EN61558)

Operating altitude up to 5000m

Specifications

Selection Guide
Certification	Part No.*	Output Power (W)	Nominal Output Voltage and Current (Vo/Io)	Output Voltage Adjustable Range (V)	Efficiency at 230VAC (%) Typ.	Max. Capacitive Load (µF)
UL/CE/CCC/CB	LM150-20B12	150	12V/12.5A	10.2-13.8	86	10000
	LM150-20B15	150	15V/10A	13.5 -18	87	6000
	LM150-20B24	156	24V/6.5A	21.6 - 28.8	88	2400
	LM150-20B36	154.8	36V/4.3A	32.4 - 39.6	88	1200
	LM150-20B48	158.4	48V/3.3A	43.2 -52.8	89	600
Note: *Use suffix “C” for terminal with protective cover and suffix “Q” for conformal coating.

Input Specifications
Item	Operating Conditions		Min.	Typ.	Max.	Unit
Input voltage Range	AC input		85	--	264	VAC
	DC input		120	--	370	VDC
Input Voltage Frequency			47	--	63	Hz
Input Current	115VAC		--	--	4	A
	230VAC		--	--	2
Inrush Current	115VAC	Cold start	--	30	--
	230VAC		--	60	--
Leakage Current	240VAC		＜0.75mA
Hot Plug			Unavailable

Output Specifications
Item	Operating Conditions		Min.	Typ.	Max.	Unit
Output Voltage Accuracy	Full load range		--	±1	--	%
Line Regulation	Rated load		--	±0.5	--
Load Regulation	0% - 100% load		--	±0.5	--
Ripple & Noise*	20MHz bandwidth (peak-to-peak value)	12V/15V	--	--	150	mV
Ripple & Noise*	20MHz bandwidth (peak-to-peak value)	24V/36V/48V	--	--	200	mV

Temperature Coefficient		--	±0.03	--	%/℃
Minimum Load		0	--	--	%
Stand-by Power Consumption		--	--	0.5	W
Hold-up Time	115VAC	8	--	--	ms
Hold-up Time	230VAC	16	--	--	ms
Short Circuit Protection	Recovery time <5s after the short circuit disappear.	Hiccup, continuous, self-recovery
Over-current Protection		110%-150% Io, self-recovery
Over-voltage Protection	12V	≤16.2VDC (Output voltage turn off, re-power on for recovery)
	15V	≤21.75VDC (Output voltage turn off, re-power on for recovery)
	24V	≤33.6VDC (Output voltage turn off, re-power on for recovery)
	36V	≤48.6VDC (Output voltage turn off, re-power on for recovery)
	48V	≤60VDC (Output voltage turn off, re-power on for recovery)
Over-temperature Protection		Output voltage turn off, self-recovery
Note: *The “Tip and barrel method” is used for ripple and noise test, output parallel 47uF electrolytic capacitor and 0.1uF ceramic capacitor, please refer to Enclosed Switching Power Supply Application Notes for specific information.