3onedata Co., Ltd. |
|
4U 16-Slot Protocol Converter Rack
Introduction
RACK4000 is a 16-slot card protocol converter/network bridge/serial
fiber MODEM 4U rack. It could be inserted in up to 16 different
devices and power them uniformly, thus reducing cables which is
convenient for management and maintenance. This product could be
used matching with various devices and provides multiple interfaces
like 100M copper port, 100M fiber port, serial port and E1, and
adopts 4U rack mounting, which can meet the requirements of
different scenes.
RACK4000 adopts dual power supply so as to reduce power supply load
and extend its service life. When one power supply fails, the other
one could work independently, ensuring that converter could operate
without interruption. When the power supply needs to be repaired or
replaced, you don’t need to dismount this rack from equipment
cabinet. All you need to do is to pull out the faulty power supply
from the back of the rack and repair it or replace it, making
maintenance extremely convenient and quick. The power supply has
been fully shielded to prevent the electromagnetic signals it
generated from interfering with the normal operation of modules.
The switching power supply offers over-voltage and over-current
protection. The output ripple and noise of power supply are less
than 50mV.
Specification
Slot | |
LED Indicator | Power Supply Indicator |
Power Requirement | |
Power Consumption | |
Environmental Limit | |
Physical Characteristic | |
Certification | |
Warranty | |
Dimension
Unit:mm
Ordering Information
Available Models | Slot | Compatible Card | Power Supply |
RACK4000 | 16 | E232 4U rack card: RS-232 to E1; | 100~250VAC or -48VDC |