Active Member
|
[China]
Address: 3/B, Zone 1, Baiwangxin High Technology Industrial park,Song Bai Road, Nanshan District, Shenzhen, 518108, China
Contact name:Vanessa
3onedata Co., Ltd. |
|
|
1-port RS-232 to E1 Converter
Introduction
E232 is a RS-232 to E1 converter which could implement bidirectional conversion between RS-232 serial port and E1 digital port. It adopts desktop mounting to meet the requirements of different scenes.
The data port of this device is operating at a rate of unframed 2.048Mbps of E1. User data has accounted for all 32 timeslots of E1 frame. The main E1 link could provide 3 types of clock source: E1 port recovery clock, internal clock and external clock of digital port. E232 provides loopback and phase adjustment function, which is convenient for digital port testing.
DIP switch could implement functions like impedance setting, BNC grounding setting, clock setting, loopback setting, restoring to factory setting, etc. Hardware adopts fanless, low power consumption, wide temperature range design, and can be widely used in various departments and systems such as industrial control, environment monitoring, network monitoring, etc.
Specification
E1 Port |
Interface Protocol Standard: conform to the recommendation of ITU-TG.703 Output Jitter Transfer: conform to the recommendation of ITU-TG.735 Input Jitter Tolerance: conform to the recommendation of ITU-TG.823 Output Jitter: conform to the recommendation of ITU-TG.823 Line Rate: bidirectional 2.048Mbps synchronized data Transmission Distance: 2km Clock Recovery Accuracy: ±50ppm Interface Code Pattern: HDB3 Frame Format: un-framing CRC Check: No Clock Frequency: 2.048MHz Interface Connection: BNC, RJ45 Interface Impedance: 75Ω imbalance(BNC) and 120Ω balance (RJ45,) Interface Protection: 1500V Electromagnetic isolation
|
| RS-232 Port |
Standard: EIA RS-232C Pin Definition: TXD,RXD,CTS,DSR,GND,DCD Interface Rate: 0～115200bps Transmission Distance: less than 15m Line Code: NRZ Interface Type: DB25 Female (equipped with DB25 male to DB9 female cord) Connection Cable: DB25 male to DB9 female cord Interface Protection: 600W surge protection, 15KV electrostatic protection
|
LED Indicator
| Power indicator, loss-sync alarm indicator, upstream E1 link whole code1 alarm indicator, E1 link inference alarm indicator, data receiving from G.703 network indicator, data sending to G.703 network indicator |
Power Requirement
|
220VAC or -48VDC
|
Power Consumption |
2.00W
|
Environmental Limit |
Operating temperature:-25~70℃ Storage temperature: -40~85℃ Relative humidity: 5%～95%(no condensation)
|
Physical Characteristic |
Shell: Plastic Installation: desktop installation Dimension (W x H x D): 227.4mm×146.3mm×42.7mm Weight: 260g
|
Certification |
CE, FCC, RoHS
|
Warranty |
3 years
|
Dimension
Unit:mm
Ordering Information
| Available Models | RS-232 | E1 | Power Supply Range |
| E232 | 1 | 1 | 220VAC or -48VDC |
