10A Four Terminals Cable Testing Equipment With Multiple Trigger Methods

10A Four Terminals Cable Testing Equipment With Multiple Trigger Methods

Cable Testing Equipment Description:

This resistance tester is a high-precision tester specially designed and developed for ultra-low DC resistance test. The measuring range of the instrument is: 0.01u Ω ~ 10m Ω; The display digit is five and a half digits; Automatic bidirectional current test, pulse test method avoids the heat generated by the test circuit and affects the test accuracy. When testing cable resistivity, multiple current tests are not required; The test speed can reach 30 times per second; The test accuracy can reach 0.02%; Temperature compensation can avoid the influence of ambient temperature on the test work; Multiple interface functions are provided to facilitate data communication and remote control with PC.

It can be applied to various ultra-low DC resistance / resistivity tests of wires and cables, shunts, metals, conductors, etc., and can also measure various switching resistance; Relay wire packaging and contact resistance; Contactor resistance; Wire resistance; Transformer, inductance, motor, damper wind resistance (inductive load, please use unidirectional current mode test); Resistance of automobile metal to ships and aircraft, etc.

Cable Testing Equipment Parameter:

Cable Testing Equipment Feature:

• The highest resistance accuracy: 0.02%; the smallest resistance resolution: 0.01uΩ
• Maximum test range: 0.01uΩ～10MΩ
• Temperature compensation function (TC); basic temperature accuracy: 0.1 ℃
• Zero base design, weak resistance test does not need to be cleared
• 3 gear comparison function: qualified/over upper limit/over lower limit
• Multiple trigger methods: internal, external, contact and manual trigger.
• Maximum test speed: about 100 times/sec
• HANDLER/USB/RS232C/RS485 Interface for remote control
• Simultaneous measurement of environmental humidity
• U disk records test data, and can remotely upgrade the instrument software

About Us

Our company is a supplier of special quality testing equipment which is not generally available on the market. Our only business is the designing, development, and manufacturing of special test equipment with reference to IEC, EN, UL, ISO, ASTM or other national and international standards. Our equipment is built to the current requirements set by the Standards.

Our instrument can proceed the following measure services:

A: Endurance and reliability testing

B: Laboratory tests

C: QC test

D: Process Monitoring

E: 100% production tested