|
[China]
Trade Verify
Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong
Contact name:Tessa Huang
Guangzhou HongCe Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Length 100mm Diameter 1mm - Test Probe D With 1 N Force Scale Display IEC60529
The 1mm test rod meets IEC61032 figure 4 test probe D and EN Standards including IEC60529 for IP4 and suffix D codes. It is used to verify the protection of persons against access to hazardous parts. Also it is used to verify the protection against access with a tool. The handle and stop face are made of nylon. The rod is made of stainless steel, with dynamometer.
Product information:
This probe conforms to the standard requirement of IEC61032 figure 4 test probe D and IEC 62368-1 Figure V.5, IEC 60065:2014 clause 9.1.4, and etc. This rod probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.
Customizable: It can be used for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .The probe whose model number is with "T" is with force.
Main specification and corresponding technical parameters:
| Model | HT-I04T |
| Name | Test rod probe with force |
| Diameter of the metal wire | Ф1+0.05 0 |
| Sphere diameter | SФ35±0.2 |
| Handle diameter | Ф10 |
| Probe length | 100±0.2 |
| Handle length | ---- |
| Force | With force of 1N |
| Applied standard | IEC60529 |
