|
[China]
Trade Verify
Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong
Contact name:Tessa Huang
Guangzhou HongCe Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
IEC60695 Flammability Testing Equipment , Needle - Flame Tester with Ф0.9mm needle-shaped burner
Description:
This tester is applicable to the research, production and quality inspection departments of lighting, low-voltage electrical appliances, household appliances, machine tool appliances, motors, electric tools, electronic instruments, electrical instruments, information technology equipment, electrical service equipment, electrical connectors, accessories and other electronic equipment and their components and components, as well as insulation materials, engineering plastics or other solid materials Combustible materials industry.
The design meets the requirements of IEC 60695-11-5 "Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance" and other standards. It has the characteristics of reasonable structure, accurate control and simple operation.
Standard:IEC60695-11-5 Test flames-Needle-flame test method-Apparatus,confirmatory test arrangement and guidance
Application:This part of IEC60695 specifies a needle-flame test to simulate the effect of a samll flame which may result from fault condition, in order to assess by a simulation technique the fire hazard.
Test sample:Lighting, low-voltage electrical appliances, household appliances, machine tool electric appliance, electric motor, electric tools, electronic instruments, electrical instruments, electrical connector, such as electrical and electronic equipment and parts, components, including insulation materials, engineering plastic or other solid combustible materials.
Feature:The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length.
Parameters:
| ParametersModel | NF-2(Touch screen) |
| Working voltage | 220V/50Hz |
| Control operation mode | PLC control, 7 inch color touch screen operation, with infrared remote control |
| Combustor | Inner boreφ0.5mm ± 0.1mm ,OD ≤φ0.9mm ,L ≥ 35mm,stainless steel |
| Gas category | Butane or propane gas having a purity of at least 95% ( can use the bottled lighter gas) |
| Height of the flame | 12±1mm adjustable (with flame height gauge) |
| Flame warming requirement | From 100°±5°C to 700°±3°C,time for standard values within 23.5S±1S |
| Combustion angle | Tilt 45°( testing ) or vertical ( when adjust the height of the flame) |
| Tray | A layer of silk paper (12~30g/m³) is covered on the 10mm thick pine board, with a distance of 200±5mm below the test sample |
| Timer/sustained combustion | 0-9999X0.1S |
| Temperature measuring distance | The distance between the top center of the burner and the test sample:8±1mm |
| Temperature calibration | Temperature measuring copper head:Φ4±0.01mm,weight:0.58±0.01g |
| Temperature thermocouple:The American original Omega φ0.5 armour nickel-chromium/nickel aluminum wire K-Thermocouple,temperature resistance 1100° | |
| Temperature measuring distance:6±0.5mm | |
| Air volume control | The flame height can be adjusted by adjusting the flow meter |
| Test procedure | Automatic control, independent exhaust |
| Lighting | Equip with lighting in the test chamber, with control |
| Test chamber and dimensions | >0.5 cube,black yogon background,with exhaust fan, size:1100*550*1200mm, weight:130kg |
Picture for reference:
