|
[China]
Trade Verify
Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong
Contact name:Tessa Huang
Guangzhou HongCe Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Oxygen/Air Bomb Aging Test Chamber HJ0606
Standard:
IEC60811-1-2 Common test methods for insulating and sheathing materials of electric cables Part 1: Methods for general application Section Two - Thermal ageing methods clause 8.2 and 8.3, IEC60335-1 Household and similar electrical appliances – Safety – Part 1: General requirements clause 22.32, and IEC60245-2 Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods etc.
Application:
It is suitable for the aging test in the oxygen and compressed air to the wire and cable, rubber (plastic, leather) insulation and sheathing, as well as other polymer materials under the action of a predetermined pressure and temperature.
Test sample:
Wires, cables, rubber (plastic, leather) insulation layer and sheath, as well as other polymer materials.
Features:
The test device is composed of stainless steel tank container, electrical control cabinet.
1. The tank consists of outside enclosure, insulation layer, heater, temperature aluminum cover, stainless steel pressure tank, the sample tray, automatic overpressure protection devices and other components.
2. The electrical control cabinet mainly consists of outside cabinet, power distribution box and gas distribution chassis.
Parameter:
| Parameters Name | Parameter Data | Parameters Name | Parameter Data |
| Power | AC 220V±10%, 50Hz | Tank volume | 4000cm3 |
| Maximum Working Pressure | 4MP/cm2 | Heater power | 2.4KW |
| Security Burst Pressure | 2.7－3.3MP/cm2 | Temperature Deviation | ±1℃ |
| Temperature self-control range | Room temperature 0-200℃ | Temperature control | Digital display automatic control |
| Dimensions | 820×420×670mm | Tank materials | Stainless steel |
Test conditions:
1. The materials which have different substantially compositions should not be tested simultaneously.
2. The sample should not contact the tank wall, and the samples should not contact each other.
3. The sample volume should be less than 1/10 of the tank’s effective volume.
4. Oxygen should be no less than 97% purity industrial oxygen, air should be no oil, non-moist (The air compressor is supplied by the user).
