Guangzhou HongCe Equipment Co., Ltd. |
Verified Suppliers
|
|
Fully Auto IEC Test Equipment Electric Water Kettle Testing Machine
With PLC Touch Screen Control
Product information:
The electric water kettle tester is designed and manufactured
according to IEC 60335-2-15 clause 19.101, 19.102, 22.103 and etc.
It is suitable for comprehensive lifespan testing of various types
of conventional cordless electrothermal kettle, complete simulation
of artificial water boiling mode.
The whole without staff care, failure alarm.
Each station configured independently, without mutual interference.
Very low fault rate.
Basic functions:
Contains five functions: dry heating (self-cooling), dry heating
(water cooling), withdraw (without current), withdraw (with
current), cyclic boiling water.
1. Dry heating (self-cooling): start--kettle pouring-kettle
back to origin-- dry heating end (temperature controller jumped)
--natural cooling to the thermostat reset -- cyclic dry heating
2. Dry heating (water cooling):
Start -- kettle pouring -- began to dry heating -- dry heating end
(thermostat trip)--water cooling to the thermostat reset (water
volume adjustable) -- kettle pouring-- cyclic dry heating kettle;
3. Withdraw (without current): Start -- began to withdraw
(cycle work);
4. Withdraw (with current): Start -- injecting water (water
volume adjustable) -- withdraw (with current) -- cycle work--change
the water interval (can be set times) -- cycle work;
5. Cyclic boiling water: Start--kettle pouring-kettle back to
origin--injecting water (can set the injection water
volume)--heating and boiling water--after the water is boiled
(thermostat trip)--kettle pouring --kettle back to origin--cycle
work.
Control system:
Use PLC and touch screen control system, operation is
stable, maintenance is simple and convenient.
The parameter setting and each station working
state information can be controlled and displayed on the touch
screen.
With independent design life detection board to monitor
products working state, alarm occurs when there is
abnormal and fault.
The equipment can automatically count, the test times can be
set, when it reaches to the preset value, the equipment will stop
working.
Main control parameters:
1) Water pouring time: 1~9999(s) adjustable; kettle back to origin
time: 1~9999(s) adjustable
2) Water injection time: 1~9999(s) adjustable; cooling time:
1~9999(s) adjustable
3) Withdraw conduction time: 1~9999(s) adjustable; withdraw break
off time: 1~9999(s) adjustable
4) Rest set: 1~9999(times) adjustable; rest time: 1~9999(s)
adjustable
5) Test times: 1~9999(times) adjustable; actual counting times:
1~9999(s) adjustable
Main techinical parameteters:
Power supply | 220V, 50Hz |
Test samples | Conventional cordless electrothermal kettle , can be customized for special test samples |
Application | comprehensive lifespan test for various types of conventional cordless electrothermal kettle |
Work station | 3 workstations, 6 workstations (single/double row), 10 workstations(single/double row), can be customized |
Display mode | Touch screen |
Alarm function | With fault alarm and counting alarm |
Safety protection | with leakage protection and undervoltage protection safety devices |
Efficiency | Related with the sample’s actual working time, each action control time can be set. |
Electric index | Power supply: 220V, 50Hz or 110V, 60Hz |
Test mode | 1) Dry heating mode (self cooling) |