|
[China]
Trade Verify
Address: Room 202, Building 4-2, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong
Contact name:Tessa Huang
Guangzhou HongCe Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
Movable Vertical Drop Rain Testing Machine For IPX1 IPX2 IEC60529
Products introduction
This test device is to verify Protection against Vertically Falling Water Drops. It is designed and manufactured
in accordance with the standard requirement of IEC60529 clause IPX1 and IPX2.
The rise and fall of the drip box is controlled by the motor. It is equipped with the rotatable objective table
whose rotating speed is 1r/min for IPX1 test; It is also equipped with 15°bevel for supporting sample for
the IPX2 test. What’s more, this device is with the clean water filtration unit which can prevent pinhole
from jamming.
Technical parameters
No. | Item | Parameter |
1 | Power supply | Single phase AC220V,50Hz or 110V, 60Hz |
2 | Water supply | Water flow rate＞10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit |
3 | Water tank size | L*W*H=1100×800×350mm |
4 | Drop test area | L*W*H=1000×600mm,customizable |
5 | Drop height | 200mm～1650mm adjustable |
6 | Water flow | 1+0.05 0mm/min or 3+0.05 0mm/min (Switchable) |
7 | Water hole | Φ0.4mm |
8 | Distance between holes | 20mm |
9 | Diameter of rotary table | Φ600mm |
10 | Rotating speed of the rotary table | 1r/min |
11 | Load bearing of the rotary table | ≤150㎏electrical equipment (without rotary column) |
12 | 15°bevel for supporting sample | 15°bevel |
13 | Site requirements | Dedicated IP waterproof test room,The ground should be flat with illumination 10A waterproof leakage switch(or socket)used for equipment |
14 | The area | L*W*H=1500mm×1500mm×2650mm,the size can be customized by the customers’ need. |
