UL Articulated Test Finger Probe With Flat And Cone Shaped Hand

Notes:

1 – The probes were designed with a center pin to rotate the hand with respect to the lower arm. That motion can be equivalently represented by rotating the probe.
2 – The finger ″tip″ is developed to match the dimensions of the UL articulated probe. The diameter from the tip to the first joint then tapers from the tip dimensions to the finger diameter. The joints are spaced equally along the finger length.
3 – The probe is designed to permit the hand to ″bend″ with respect to the arm using a hinge pin located 6 mm (0,24 in) from the hand length (wrist end) and the hand is restricted in bending not more than 90° with respect to the arm.
a If the upper arm is required to evaluate a part it shall consist of a flexible tube attached at the end of the lower arm, as the exact position of the elbow cannot be readily determined from the data points chosen.

Hot Tags: Figure 101.DVA.1 Articulate Probe, China, manufacturers, suppliers, factory, custom, wholesale, Flame Test Equipment, BS1363 Plug Socket Measuring Gauge, Needle Flame Tester, Water Spillage Test Apparatus, Inclined Plane Test Bench, Load Box For Lab Equipment Testing