Home Companies DELI ELECTRONICS TECHNOLOGY CO.,LTD

MKE02Z64VLD4 NXP Holland LQFP44 KE02 Sub Family RoHS

DELI ELECTRONICS TECHNOLOGY CO.,LTD
Active Member

Contact Us

[China] country

Address: RM 311 3/F LINZHAN FORTUNE BUILDING No.1 SHENHUA STREET SHENFENG ROAD LIUYUE LONGGANG AREA SHENZHEN,CHINA

Contact name:VIVI

Inquir Now

DELI ELECTRONICS TECHNOLOGY CO.,LTD

MKE02Z64VLD4 NXP Holland LQFP44 KE02 Sub Family RoHS

Country/Region china
City & Province shenzhen guangdong
Categories Connectors
InquireNow

Product Details

MKE02Z64VLD4 KE02 Sub-Family LQFP44 NXP Holland New Original Hot

 

 

Key features
 
• Operating characteristics
– Voltage range: 2.7 to 5.5 V
– Flash write voltage range: 2.7 to 5.5 V
– Temperature range (ambient): -40 to 105°C
 
• Performance
– Up to 40 MHz ARM® Cortex-M0+ core and up to 20 MHz bus clock
– Single cycle 32-bit x 32-bit multiplier
– Single cycle I/O access port
 
• Memories and memory interfaces
– Up to 64 KB flash
– Up to 256 B EEPROM
– Up to 4 KB RAM
 
• Clocks
– Oscillator (OSC) - supports 32.768 kHz crystal or 4MHz to 20 MHz crystal or ceramic resonator;
   choice of low power or high gain oscillators
– Internal clock source (ICS) - internal FLL with internal or external reference,
    31.25 kHz pretrimmed internal reference for 32 MHz system clock
   (able to be trimmed for up to 40 MHz system clock)
– Internal 1 kHz low-power oscillator (LPO)
 
 
• System peripherals
– Power management module (PMC) with three power modes: Run, Wait, Stop
– Low-voltage detection (LVD) with reset or interrupt, selectable trip points
– Watchdog with independent clock source (WDOG)
– Programmable cyclic redundancy check module (CRC)
– Serial wire debug interface (SWD)
– Bit manipulation engine (BME)
 
• Security and integrity modules
– 64-bit unique identification (ID) number per chip
 
• Human-machine interface
– Up to 57 general-purpose input/output (GPIO)
– Two up to 8-bit keyboard interrupt modules (KBI)
– External interrupt (IRQ)
 
• Analog modules
– One up to 16-channel 12-bit SAR ADC, operation in Stop mode, optional hardware trigger (ADC)
– Two analog comparators containing a 6-bit DAC and programmable reference input (ACMP)
 
 
• Timers
– One 6-channel FlexTimer/PWM (FTM)
– Two 2-channel FlexTimer/PWM (FTM)
– One 2-channel periodic interrupt timer (PIT)
– One real-time clock (RTC)
 
• Communication interfaces
– Two SPI modules (SPI)
– Up to three UART modules (UART)
– One I2C module (I2C)
 
• Package options
– 64-pin QFP/LQFP
– 44-pin LQFP
– 32-pin LQFP
– 32-pin QFN
 
 
Deli electronics tehcnology Co.,Ltd
Email:sales3@deli-ic.com
Skype:hkdeli881
Contact: VIVI-CHEN
 

Hot Products

MM74C14M Hex Schmitt Trigger 15V Max SOP14 FAIRCHILD USA Original Features ■ Wide supply voltage ...
MKE02Z64VLD4 KE02 Sub-Family LQFP44 NXP Holland New Original Hot Key features • Operating characteri...
MMA8652FCR1 Xtrinsic MMA8652FC 3-Axis 12-bit Digital Accelerometer The MMA8652FC is an intelligent, ...
MAX485ESA+T Low-Power Slew - Rate - Limited RS-485 / RS-422 Transceivers IC SOP8 Applications Low...
ABM3-25 ABM3 Smaller SMD package alternative for ABM7 series Moisture Sensitivity Level (MSL) – This ...
BZT52C5V6 410 mW Zener Diodes 2.4 to 39 Volts SOD123 VISHAY Original USA BZT52C2V4 THRU BZT52C39 ...