Active Member
|
[China]
Address: RM 311 3/F LINZHAN FORTUNE BUILDING No.1 SHENHUA STREET SHENFENG ROAD LIUYUE LONGGANG AREA SHENZHEN,CHINA
Contact name:VIVI
DELI ELECTRONICS TECHNOLOGY CO.,LTD |
|
|
DLW5BSN351SQ2L SMD Chip Capacitor 2 Line Common Mode Choke Surface Mount 350 Ohms @ 100MHz 2A DCR 40 mOhm
Solder Paste Printing and Adhesive Application
(in mm)
When reflow soldering the chip common mode choke coils, the
printing must be conducted in accordance with the following cream
solder printing conditions. If too much solder is applied, the chip
will be prone to damage by mechanical and thermal stress from the
PCB and may crack. Standard land dimensions should be used for
resist and copper foil patterns.
When flow soldering the chip common mode choke coils, apply the
adhesive in accordance with the following conditions. If too much
adhesive is applied, then it may overflow into the land or
termination areas and yield poor solderability. In contrast, if
insufficient adhesive is applied, or if the adhesive is not
sufficiently hardened, then the chip may become detached during
flow soldering process.
| Product Attributes | Select All |
| Categories | Filters |
| Common Mode Chokes | |
| Manufacturer | Murata Electronics North America |
| Series | DLW5B |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Filter Type | Power, Signal Line |
| Impedance @ Frequency | 350 Ohms @ 100MHz |
| Current Rating (Max) | 2A |
| DC Resistance (DCR) (Max) | 40 mOhm |
| Voltage Rating - DC | 50V |
| Operating Temperature | -40°C ~ 85°C |
| Mounting Type | Surface Mount |
| Size / Dimension | 0.197" L x 0.197" W (5.00mm x 5.00mm) |
| Height (Max) | 0.177" (4.50mm) |
| Package / Case | Horizontal, 4 PC Pad |
Deli electronics tehcnology co ltd
www.icmemorychip.com
Email:sales3@deli-ic.com
Skype:hkdeli881
TEL:86-0755-82539981
