IC Electronic Components Microcontrollers Microprocessors STM32
32-Bit Arm Cortex MCUs Mainstream MCUs STM32F103VET6
Mainstream Performance line, Arm Cortex-M3 MCU with 512 Kbytes of
Flash memory, 72 MHz CPU, motor control, USB and CAN
Description
The STM32F103xC, STM32F103xD and STM32F103xE performance line
family incorporates the high-performance ARM® Cortex®-M3 32-bit
RISC core operating at a 72 MHz frequency, high-speed embedded
memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes),
and an extensive range of enhanced I/Os and peripherals connected
to two APB buses. All devices offer three 12-bit ADCs, four
general-purpose 16-bit timers plus two PWM timers, as well as
standard and advanced communication interfaces: up to two I2Cs,
three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN. The
STM32F103xC/D/E high-density performance line family operates in
the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power
supply. A comprehensive set of power-saving mode allows the design
of low-power applications.
These features make the STM32F103xC/D/E high-density performance
line microcontroller family suitable for a wide range of
applications such as motor drives, application control, medical and
handheld equipment, PC and gaming peripherals, GPS platforms,
industrial applications, PLCs, inverters, printers, scanners, alarm
systems video intercom, and HVAC.
Related items:
STM32F103C8T6 |
STM32F103RCT6 |
STM8S003F3P6 |
STM32F030C8T6 |
STM32F103VET6 |
STM32F103VCT6 |
STM32F103RBT6 |
STM32F103ZET6 |
STM32F103CBT6 |
STM32F103RET6 |
STM32F407VET6 |
STM32F030K6T6 |
STM32F030F4P6 |
STM8S003F3P6TR |
STM32F105RBT6 |
STM32F407VGT6 |
STM32F107VCT6 |
STM32F405RGT6 |
STM32F407ZGT6 |
STM32F030CCT6 |
All features
- Core: ARM® 32-bit Cortex®-M3 CPU
- 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1)
performance at 0 wait state memory access
- Single-cycle multiplication and hardware division
- Memories
- 256 to 512 Kbytes of Flash memory
- up to 64 Kbytes of SRAM
- Flexible static memory controller with 4 Chip Select. Supports
Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
- Clock, reset and supply management
- 2.0 to 3.6 V application supply and I/Os
- POR, PDR, and programmable voltage detector (PVD)
- 4-to-16 MHz crystal oscillator
- Internal 8 MHz factory-trimmed RC
- Internal 40 kHz RC with calibration
- 32 kHz oscillator for RTC with calibration
- Low power
- Sleep, Stop and Standby modes
- VBAT supply for RTC and backup registers
- 3 × 12-bit, 1 μs A/D converters (up to 21 channels)
- Conversion range: 0 to 3.6 V
- Triple-sample and hold capability
- Temperature sensor
- 2 × 12-bit D/A converters
- DMA: 12-channel DMA controller
- Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs
and USARTs
- Debug mode
- Serial wire debug (SWD) & JTAG interfaces
- Cortex®-M3 Embedded Trace Macrocell™
- Up to 112 fast I/O ports
- 51/80/112 I/Os, all mappable on 16 external interrupt vectors and
almost all 5 V-tolerant
- Up to 11 timers
- Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse
counter and quadrature (incremental) encoder input
- 2 × 16-bit motor control PWM timers with dead-time generation and
emergency stop
- 2 × watchdog timers (Independent and Window)
- SysTick timer: a 24-bit downcounter
- 2 × 16-bit basic timers to drive the DAC
- Up to 13 communication interfaces
- Up to 2 × I2C interfaces (SMBus/PMBus)
- Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem
control)
- Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed
- CAN interface (2.0B Active)
- USB 2.0 full speed interface
- SDIO interface
- CRC calculation unit, 96-bit unique ID
- ECOPACK® packages
FAQ
How long is your delivery time?
A: Normally 1 working days after payment; Special requirement
orders, delivery time is negotiable.
Q: How to make sure the quality?
A:All product will be inspected by our strict QC
department,warehouse,FAE,Sales before shiping.
Q:What is the warranty?
A:1-3 months to replace new items for free.
1-2 years repairing free according to different products.
Q:Do you accept OEM design?
A:Yes, we do. We can design according to your requirement, MOQ
usually 1-10.
Q:Do you accept pay 30% in advance?
A:Yes, we do. We can start to prepare your goods when receive 30%
payment, and send them after get the rest 70% payment.
Q:What payment terms you accept?
A:We accept Paypal, T/T, Alibaba Trade Assuarce, Western Union,
Wechat, Alipay, in Cash (RMB or USD).
Pls contact us to check stock quantity,price ,lead time, E-mail:
info@ysonix.com