Guangzhou Jin Lun Electric Equipment Co.,Ltd |
|
9.2KW 10P Top Blow Air Source Hot Water Independent Air Source Heat Pump
Contact:Swallow | Heat Pump Professional Provider
Mobile/Wechat: +86 13699735517
Email:meeting12@heatpumpchina.com
Specification parameter:
Rated input power: 9.2KW
Rated heating capacity : 36.8KW
Hot water supply: 800L/H
Rated voitage: 380V/60HZ
Rated current :18A
Rated outlet water temperature :55℃
Maximum outlet water temperature :60℃
Compressor: Copeland
About us:
1). We were established in 2001.
2).We are a professional heat pump manufacturer,Located arround baiyun Air port
3). We are trading on Meeting Brand ,Meeting heat pump Well-know brand we operate in Europe market
4). Our company has been inspected and certificated by TUV and SGS.
5). We are the one of the first manufacturers whose heat pumps are with top COP gaining grants from Chinese government.
6). We pass ISO9001 quality management system and ISO14000 environment protection system
7). Our testing laboratory can test heat pump up to 60KW heating capacity and create testing air temperature condition during
-25DegC~45DegC,according to EN14511 standard.
8). Our leading products: Air to water heat pump , DC inverter heat pump, High water temperature heat pumps
Monoblock house heating heat pumps ,Split heat pump ,Super low noise heat pumpHeat pump dryer ,Ground
source heat pump , water to water heat pump , swimming pool heat pump
QC
1 . Complying with ISO standard. Quality Ensured .
2 . Complete Inspection for each unit before out of factory , covering water system and electricity detection and testing , ensuring 100 % right product before shipment .
3 . Strict quality control during production . We have liquid soap detection , halogen detection , electrical detection and water - soaking detection during production to avoid gas leakage and electrical problems .
4 . Full inspection on bigger parts such as compressors, condensers, evaporators, expansion valves , flow switches, controllers etc .. Selection inspection for small parts such as sensors, pressure switches etc ..
FAQ
Q1. Can I have a sample order for Heat pump or Water tank?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-10days, mass production time depend on the products'quantity.
Q3.Do you offer guarantee for the products?
A: Yes, 12 months since the heat pump depart from the port of loading (Refer to the Bill of Lading).
Certificsate we have got :
A. Payment service
1. T/T
2. L/C (for container order only)
B. Technical service
1. We calculate the capacity and recommend the best models.
2. We supply you the professional refrigeration technical support
and electronic technical support for your installation, debugging
and operation.
3. We supply the spare parts and technical support in and after the
warranty time.
4. We supply the training course to your workers at our factory if
you need.
5. We can offer site training to your workers in your place which
is negotiable.
C. After-sales service
1. Technical support for your installation, operation and
maintenance.
2. Standard warranty time: One years’warranty for heat pumps
You can also pay for extended warranty or we can renegotiate the
longer warranty period.
Our leading products
Air to water heat pump , DC inverter heat pump, High water temperature heat pumps
Monoblock house heating heat pumps ,Split heat pump ,Super low noise heat pump
Heat pump dryer ,Ground source heat pump , water to water heat pump , swimming pool heat pump