Active Member
|
[China]
Address: Building No.4.Zhongtie Xicheng Third East Road of Guanghua, Qingyang District, Chengdu city,Sichuan,CHINA
Contact name:Nancy
Chengdu Forster Technology Co., Ltd. |
|
|
Factory Direct Supply Of High Quality And High Efficiency Equipped With Detection System Mini Hydro Power Plant
Our main products included:
1. Kaplan turbine generators series.
2. Turgo turbine generators series.
3. Tubular turbine generators series.
4. Francis turbine generators series.
5. Pelton turbine generators series.
Product features:
Nowadays, the pelton turbine, which takes the water truck as the
prototype, is becoming a new hot field in the field of water
turbine. When other kinds of turbine are relatively mature, the
impact turbine is receiving more and more attention. Modern pelton
turbine is a kind of hydraulic prime mover which uses special water
guide mechanism to draw out free jet with kinetic energy and rush
to the runner bucket to make the runner rotate and do work so as to
complete the conversion of water energy into mechanical energy. In
the impact turbine, according to the relative position and working
times of the working jet and the runner, it can be divided into the
cut-and-impact turbine, the oblique-impact turbine and the
double-impact turbine.
Theoretical analysis shows that the efficiency is the highest when
the circumferential velocity of the bucket knot is about half of
the jet velocity. When the load changes, the inlet speed direction
of the runner remains unchanged. In addition, these turbines are
all used in high-head power stations. The change of water head is
relatively small and the speed changes little, so the efficiency is
less affected by the change of load, the efficiency curve is
relatively gentle, and the maximum efficiency exceeds 91%.
1.suitable for high head,small flow and flow changes in large runoff hydropower station.
2.With the power plant investment is small,compact units structure characteristics.
3.Has the efficiency changes smoothly,operating a wide range,even in the 15--20% load is reduced efficiency.
4.Suitable for high head,small flow station in mountainous area.
5.A unit construction,simple restrictions without cavitation condition,the advantages of stable operation,less investment,construction area.
| CJ237-W-45/1x4.8 Hydro Tubine Performance Data And Supporting Table | |||||||||||
| Model | Turbine Parameters | Generator Parameters | Driving mode | Speed Way | Water Intake | ||||||
| Design head(m) | Under the design head | Design speed (r/min) | The power of generator | Rated speed(r/min) | Runaway speed(r/min) | Vavel control | Guide vane control | Diameter (mm) | |||
| Flow rate (m3/s) | The output(kw) | ||||||||||
| CJ237-W-45/1x4.8 | 60 | 0.06 | 28 | 637 | 26 | 1000 | 1800 | Between the united | manually | 200 | |
| 70 | 0.065 | 35.9 | 688 | 40 | 750 | 1500 | Between the united | manually | 200 | ||
| 80 | 0.07 | 43.9 | 735 | 40 | 750 | 1500 | Between the united | manually | 200 | ||
| 90 | 0.074 | 51.9 | 780 | 55 | 750 | 1500 | Between the united | manually | 200 | ||
| 100 | 0.078 | 59.7 | 822 | 55 | 750 | 1500 | Between the united | manually | 200 | ||
| 110 | 0.082 | 69.1 | 862 | 75 | 1000 | 1800 | Between the united | manually | 200 | ||
| 120 | 0.085 | 80.2 | 901 | 75 | 1000 | 1800 | Between the united | manually | 200 | ||
| 130 | 0.089 | 90.8 | 937 | 75 | 1000 | 1800 | Between the united | manually | 200 | ||
| 140 | 0.092 | 102 | 937 | 100 | 1000 | 2200 | Between the united | manually | 200 | ||
| 150 | 0.095 | 112 | 1007 | 100 | 1000 | 2200 | Between the united | manually | 200 | ||
| 160 | 0.098 | 123 | 1040 | 100 | 1000 | 2200 | Between the united | manually | 200 | ||
| 170 | 0.0102 | 134 | 1073 | 125 | 1000 | 2200 | Between the united | manually | 200 | ||
| 180 | 0.0104 | 144 | 1103 | 125 | 1000 | 2200 | Between the united | manually | 200 | ||
Product pictures:
Installation picture:
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
Q7,Does your company have its own independent official website?
Of course, and we can see more information about our company and products on our official website.
website address: www.fstgenerator.com
