Active Member
|
[China]
Address: Building No.4.Zhongtie Xicheng Third East Road of Guanghua, Qingyang District, Chengdu city,Sichuan,CHINA
Contact name:Nancy
Chengdu Forster Technology Co., Ltd. |
|
|
High Efficiency Hydro Electric 50kw - 200kw Kaplan Turbine Generator For River Power Plant
Our main products included:
1. Kaplan turbine generators series.
2. Turgo turbine generators series.
3. Tubular turbine generators series.
4. Francis turbine generators series.
5. Pelton turbine generators series.
Product features:
Kaplan turbine runner is composed of runner body, blade and drainage cone. The number of blades is less than that of Francis flow, and the axis of blade is perpendicular to the axis of turbine. Suitable for middle and low water head, large flow of hydropower stations. At the same head, its specific speed is higher than that of Francis turbine. The applied head is about 3 to 80m. The water flow changes from radial flow between the guide blade and the runner to axial flow, while in the runner area, the water flow remains axial flow.
1. Suitable for the development of low water head (2-30m) larger flow of water resources;
2. Appliceable to large and small head change load changes of power plant;
3. For the low head,head and power changed greatly power station,can stably under various working conditions;
4. This machine is a vertical shaft device,has the advantages of simple structure,convenient repair,equipment,low price,easy to realize the direct drive etc.
| ZD760- LM/LMY-100 Hydro Kaplan Tubine Performance Data And Supporting Table | |||||||||||||
| Model | Turbine Parameters | Generator Parameters | Driving mode | Speed Way | |||||||||
| Design head(m) | Under the design head | Design speed (r/min) | Model | power (kw) | Rated voltage (v) | Rated electric current (A) | Rated speed (r/min) | The run way speed (r/min) | Manually | Automatic | |||
| Flow rate (m3/s) | The output(kw) | ||||||||||||
| ZD760- LM/LMY-100 = 4-5° | 2.1 | 2.61 | 47.1 | 261 | SF40-8/493 | 40 | 400 | 72.2 | 750 | 1500 | Belt | Manually | TT-3CC0 |
| 2.5 | 2.49 | 61.2 | 285 | SF55-8/493 | 55 | 400 | 99.2 | 750 | 1500 | Belt | Manually | TT-3CC0 | |
| 2.7 | 2.96 | 68.5 | 300 | SF55-6/493 | 55 | 400 | 99 | 1000 | 2000 | Belt | Manually | TT-3CC0 | |
| 3.3 | 3.27 | 92.5 | 327 | SF75-8/590 | 75 | 400 | 136 | 750 | 1500 | Belt | Manually | TT-3CC0 | |
| 4 | 3.6 | 123 | 360 | SF1 00-8/590 | 100 | 400 | 181 | 750 | 1500 | Belt | Manually | TT-3CC0 | |
| 4.4 | 3.78 | 143 | 375 | SF1 25-16/990 | 125 | 400 | 226 | 750 | 750 | Straight league | Manually | TT-3CC0 | |
| 5.2 | 3.95 | 177 | 375 | SF1 60-16/990 | 160 | 400 | 289 | 375 | 750 | Straight league | Manually | TT-3CC0 | |
| 6 | 4.34 | 224 | 429 | SF200-14/990 | 200 | 400 | 361 | 428.6 | 856 | Straight league | Manually | TT-3CC0 | |
| 7 | 4.51 | 270 | 429 | SF250-14/990 | 250 | 400 | 451 | 428.6 | 856 | Straight league | Manually | TT-3CC0 | |
| ZD760- LM/LMY-100 = 4-10° | 2 | 2.87 | 48 | 240 | SF4 0-8/49 3 | 40 | 400 | 72.2 | 750 | 1500 | Belt | Manually | TT-3CC0 |
| 2.5 | 3.21 | 67 | 269 | SF55-8/493 | 55 | 400 | 99 | 750 | 1500 | Belt | Manually | TT-3CC0 | |
| 3.1 | 5.58 | 92.5 | 300 | SF75-8/590 | 75 | 400 | 13.5 | 750 | 1650 | Gear | Manually | TT-3CC0 | |
| 3.9 | 3.71 | 121 | 300 | SF1 00-8/590 | 100 | 400 | 181 | 750 | 1650 | Straight league | Manually | TT-3CC0 | |
| 4.2 | 4.16 | 141.9 | 348 | SF1 25-16/990 | 125 | 400 | 226 | 375 | 750 | Straight league | Manually | TT-3CC0 | |
| 4.8 | 4.58 | 183 | 375 | SF160-16/990 | 160 | 400 | 289 | 375 | 750 | Straight league | Manually | TT-3CC0 | |
| 5.7 | 4.75 | 220 | 375 | SF200-16/990 | 200 | 400 | 361 | 375 | 750 | Straight league | Manually | TT-3CC0 | |
| 6.5 | 5.2 | 280 | 429 | SF250-14/990 | 250 | 400 | 451 | 428.6 | 856 | Straight league | Manually | TT-3CC0 | |
Design Installation Diagram:
Q1, Which turbine should I choose?
Please tell me the water head, flow rate, frequency, Total power you need
, voltage, on grid or off grid operation, we will propose a solution.
Q2, Can your factory provide all the equipment for hydropower generation?
Yes, we can provide you with turbines, hydro-generators, pressure regulators, turbine wheels, control panels, transformers, monitoring systems and more.
Q3, Can you do EPC for a hydroelectric power plant?
Yes, we can provide TURN-KEY and EPC services including measurement, design, manufacturing, construction, manufacturing, commissioning, inspection, maintenance runner replacement and refurbishment/upgrade/improvement/repair/refurbishment of turbines/generators including bearings, seals For parts and key parts, we will send technicians and workers to install equipment.
Q4,Is your company a trading company or a manufacturer?
We are a manufacturer of hydro turbine generators and started to promote the international market in 2013. Our factory is located in Sichuan, where China's water conservancy and hydropower is most developed. Welcome to visit our factory in China.
Q5, What is an acceptable MOQ?
For this product, our acceptable MOQ is 1 set.
Q6,How long is the delivery time?
Delivery times range from 15 days to 6 months depending on the model you are purchasing.
