|
[China]
Trade Verify
Address: Room A18, No. 28 Zhuji Road, Tianhe District, Guangzhou
Contact name:Ada
Guangzhou Zhenhui Machinery Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
6HK1 Engine Direct Injection Turbocharger 114400-4380 Suitable For Excavator ZX330-3 ZX350-3
Specification
About the product:
What should be paid attention to in the maintenance and care of the
turbocharger of the 6HK1 engine?
For the maintenance and care of the turbocharger of the 6HK1
engine, the following are some matters that need attention:
1. Lubricating oil supply: Make sure that the turbocharger gets
enough lubricating oil supply. Check the quality and level of the
lubricating oil regularly and replace it according to the
manufacturer's recommendations.
2. Cooling system: The turbocharger requires an effective cooling
system to reduce the temperature and prevent overheating. Make sure
that the coolant in the cooling system (usually a mixture of
cooling water and antifreeze) is at an appropriate level, and check
the performance of the cooling system regularly.
3. Intake system filter: Install and maintain a good intake system
filter to prevent dust, oil residue and other impurities from
entering the turbocharger. Clean or replace the filter regularly to
ensure good intake quality.
4. Proper heating and cooling: Before the engine is started, make
sure that the turbocharger has enough time to warm up to avoid
sudden thermal shock. After the engine is shut down, let the
turbocharger cool down normally to avoid sudden oil supply stop.
5. Regular inspection and cleaning: Regularly inspect the outside
and inside of the turbocharger to pay attention to whether there is
oil stains, leakage or foreign matter blockage. According to the
manufacturer's recommendations, regular cleaning and maintenance
should be performed to ensure the performance and durability of the
turbocharger.
6. Avoid excessive acceleration and overloading: Excessive
acceleration and overloading may put excessive load and pressure on
the turbocharger, affecting its life and performance. When
operating the engine, follow the manufacturer's recommendations and
avoid excessive acceleration and overloading.
7. Regular maintenance: Regularly perform comprehensive maintenance
on the turbocharger according to the manufacturer's recommendations
and maintenance plan. This may include replacing seals, checking
bearing wear, calibration adjustments, etc.
Why choose Us
1.Rich Experience: We are manufacturer
