Shandong Highland Hydraulic Seiko Co., Ltd. |
Verified Suppliers
|
|
Industrial machinery underground truck hydraulic pumps easy to use
Quick Detail:
· Cast iron housing
· Hydraulic components
· Model PV22+MV23
· Hydraulic system power components
· Principle hydraulic transmission
· Features lifetime technical support
· Simple layout
· System Solutions
· Work fast
· Fully replace imported products
· Patent certificate certification
· Application industrial machinery underground truck hydraulic pumps
· 1 year warranty
Description:
How to use the scraper?
(1) When connecting the oil pipes, unscrew the cap on the quick
connector, clean the oil port of the quick connector with cotton
yarn, connect according to the position of the oil port
corresponding to each oil pipe, and do not connect wrongly, and
then start the tractor engine slowly respectively. Lift the bucket
door and bucket, and check whether the oil pipes and oil ports are
leaking oil. At this time, if the front beam of the bucket is
supported on the frame, the bucket locking pin should be removed.
If the quick connector cannot be connected , It may be that after
the oil circuit is disconnected, the bucket moves up and down for
some reason, causing the oil pressure in the pipeline to be high.
At this time, loosen the nut connecting the hard pipe and the hose
at the mop socket to make the high-pressure oil let go.
(2) After the oil circuit is connected, each operating handle
should be moved slowly 4 to 5 times to check whether the unloading
device, bucket door, and the front, rear, lifting and lowering
movements of the bucket are flexible and whether there is any
malfunction. Lower it to the ground, retract the unloading plate,
close the bucket door, and check whether the oil level of the
hydraulic oil tank is near the marking line of the liquid level
indicator window.
PV22+MV23 Technical parameter:
PV22 hydraulic pump and MV23 hydraulic motor series | PV22 | MV23 | ||
Displacement | Max displacement | ml/r | 69.8 | 89 |
Speed | Max continuous working speed (Full load condition) | r/min | 3200 | 3200 |
Rated speed | r/min | 2500 | ||
Min continuous working speed | r/min | 500 | ||
Pressure | Rated working pressure | Mpa | 35 | |
Max working pressure (transient) | Mpa | 42 | ||
Continuous working pressure | Mpa | 30 | ||
Allowable shell pressure (Absolute) | Mpa | Constant0.25, Peak value0.5 | ||
Torque | Continuous output torque (Under continuous working pressure) | Nm | 342.6 | 432.9 |
Max output torque | Nm | 480 | 606 | |
Power | Continuous output power | KW | 107 | 139 |
Max power | KW | 114 | 150 | |
Temperature | Allowable shell temperature | ℃ | 80 | |
Max working temperature of oil tank | ℃ | 70 | ||
weight | PV series hydraulic pump hydraulic oil drain | kg | 62 | |
PV series hydraulic motor hydraulic oil drain | kg | 66 |
Notices:
Hydraulic oil
The suitable replacement period for hydraulic oil in a sealed tank
system is 2000 hours, and more often if the hydraulic oil is
contaminated with water or other external materials or subjected to
abnormal operating conditions.
As a general recommendation, the 10µ inlet oil filter should be
replaced every spring or every 1500 hours (whichever occurs first)
on a sealed tank system, or in an open tank system with an air
filter fill cap. The oil filter should be replaced every 500 hours.
Heat Exchanger
The heat exchanger core and fins are kept clean at all times for
maximum cooling and system efficiency, and the exterior of the heat
exchanger is checked daily for blockages and cleaned as needed.
Application:
Mixer truck: concrete mixer truck, cement mixer truck;
Coal mining machinery: scraper;
Industry: pharmaceutical machinery;
Transport vehicles: road rollers, concrete pump trucks, stabilized
soil mixers
FAQ
Q1. Can I have a sample order for industrial machinery underground truck hydraulic pumps easy to use?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
10 to 15 days for samples, mass production according to MOQ
Q3. Do you have any MOQ limit for industrial machinery underground truck hydraulic pumps easy to use?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
Ship by sea, it generally takes 15-20 days to arrive, and air is also optional.
Q5. How to proceed an order for industrial machinery underground truck hydraulic pumps easy to use ?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.
Q7: How to deal with the faulty?
Firstly, our products are produced in strict quality control system.Secondly, we will inspect the defective pump and motor, and then respond according to the actual situation.