Parker Replacement T6 T7 Series Vane Pumps Hydraulic Pump
Construction Machine Hdyraulic Parts
Product details:
Model 1T6,T7 Series-single pumps
Model 2T6,T67,T7 Series double pumps
Model 3: T6,T67,T7 Series triple pump
Model 4: T6GC,T7GB Series-vane pumps
The T6T7 series vane pump has 3 specifiions (C, D and E) of the
casing. Each casing can be equipped with corresponding series of
pump core components with different displacements to form a series
of specifiions of this pump. The suction port is When operating at
atmospheric pressure and at the highest speed, the flow and
displacement ranges of each specifiion series are:
C series: 10 to 100ml/rev (3 to 31 gpm at 1200 rpm);
D series: 48 to 158ml/rev (14 to 50 gpm at 1200 rpm);
E series: 132 to 227 ml/rev (42 to 72 gpm at 1200 rpm).
Parker vane pump T6-T7 single characteristics:
・Low noise improves work safety and increases acceptance.
• Strong anti-pollution ability. This series of pumps adopts
double-lip structure blades, which have strong anti-pollution
ability and long service life;
• The optional structural parameters and forms are abundant, such
as: pump core displacement, drive shaft form, oil port
configuration form, etc., which is convenient for users to choose
according to installation needs;
・Diversity of installation forms A pair of double pumps can have 32
installation combinations, and a triple pump can have as many as
128 installation combinations, which can reduce costs and improve
performance.
• Extensive applicability-The installation method complies with SAE
J744a and IS. The 2-hole flange form specified in 3019-1 is
equipped with various flat key and spline drive shafts for
selection. For vehicle pumps, there is also an option of T-shaped
drive shaft (in accordance with SAE J718C), allowing direct
installation with tractors (speed 540~1000 rpm);
・Dual shaft seal option One vehicle type pump has a dual shaft seal
type (T6*P type) with an oil drain interface, which can be directly
installed on the gear box
Specifiion:
NO:USE IOS 3019 installation flange
S:USE SAE C J744 Installation flange W:Heavy strkeyed shaft
Views from shaft end of pump
See picture above
T6CC | S | w | -25 | -17 | -1 | R | 2 | -C | 1 | 10 |
series | Typecode | ViceType | Flow-shaftend pump | Flow-coverend pump | Shaft type | Rotation | Portpositions | Designnumbe |