Busway Bus Duct for Power Generation Plants and Renewable Energy
Systems
Product Description
Materials
- Bus ducts are typically made of copper or aluminum conductors,
which are highly conductive and able to carry large amounts of
electrical current.
- The conductors are often enclosed in a protective housing or
enclosure, which can be made of a variety of materials, including
steel, aluminum, or fiberglass.
- The enclosure is designed to provide insulation and protection
against environmental factors, such as moisture, heat, and dust.
Applications
- Bus ducts are used in a variety of applications, including power
distribution, motor control, and lighting.
- They are often used in large industrial and commercial facilities,
such as factories, data centers, and hospitals.
- Bus ducts are ideal for applications where high power is needed, as
they can handle larger amounts of electrical current than
traditional cable or conduit systems.
- They are also useful in applications where space is limited, as
they take up less space than traditional cable and conduit systems.
- Bus ducts can be designed to meet specific safety standards, such
as those set by the National Electrical Code (NEC) or the
International Electrotechnical Commission (IEC).
- They can be designed for indoor or outdoor use, and can be rated
for different voltage and current levels.
- Bus ducts can be customized to fit specific application
requirements, including the size and shape of the conductors, the
type of insulation used, and the overall design of the enclosure.
- Some common applications of bus ducts include:
- Power distribution between large generators, transformers, and
switchgear
- Power distribution within a building or facility
- Motor control for large motors or groups of motors
- Lighting control and distribution
- Data center power distribution and backup power systems
- Bus ducts can be more expensive than traditional cable and conduit
systems, particularly for high-current applications. However, they
offer several advantages, including higher power capacity and
improved reliability, which can make them a cost-effective choice
in the long run.
Specification
Conductor Material | Copper or Aluminum Bar |
Rated Working Voltage | 415V or 690V |
Rated Frequency | 50/60Hz |
Protection Class | IP54/IP65/IP66 |
Rated Operating Current | 250~6300A |
Configuration | 3P3W, 3P4W, 3P5W |
Surface treatment | Powder Coating Spray |
Insulation | Mylar or Epoxy |
Marketing
Our business scope covers 6 continents and over 50 countries.
Packing
Production Facilities