GuangDong Heng AnShun Electrical Power Equipment Service Co., Ltd. |
Verified Suppliers
|
|
Lead Acid Constant Current Jump Starter Portable Charger Automatic
Battery Charger Blue Plastic Shell Battery Charger
Product Introduction:
The Pulse battery charger manufactured by our factory is
specifically designed for various types of batteries, including
lead-acid batteries, maintenance-free batteries, start batteries,
start-stop batteries, 12V and 24V batteries, and 12.6V lithium
batteries.
This charger utilizes a dedicated intelligent microcomputer chip to
control the entire charging process. It employs advanced pulse
width modulation technology, resulting in a compact size, safety,
and convenience. The charger offers high-efficiency conversion,
stable output current, and a large design capacity. It can operate
at full load for extended periods, making it a next-generation
eco-friendly charger.
The charger incorporates several protective features such as
short-circuit protection, reverse polarity protection,
overtemperature protection, and low-voltage protection. It supports
various charging states including constant current, constant
voltage, floating, trickle, and others. These charging states help
improve battery life by reducing the rate of water loss and
eliminating issues like battery heating and overcharging.
Overall, our Pulse battery charger is designed to provide efficient
and reliable charging for different types of batteries while
extending their lifespan and ensuring optimal performance.
Operation Mode
No-load standby: When the charger separates from the battery due to poor contact
during charging or replaces another battery, the display will
clearly show empty On-board standby. Standby is equivalent to about
2W energy consumption of small luminous lamps.
Constant current mode: When the battery voltage is lower than the charger's set voltage,
it is a constant current charging mode, and the charger will
provide a constant charging current to the battery.It has the
effect of protecting the battery and charger.
Constant pressure mode: Pulse width modulation (PWM) technology is used. Precisely control
the charger's charge current and output voltage to ensure that the
battery is safely fully charged. It is best to avoid overcharging
the battery.
Floating charge mode: When the battery is about to be fully charged, the charger does
not stop charging,but still provides a constant float charge
voltage and a small float charge stream to supply the battery.
Trickle mode: When the battery voltage is close to the set voltage value, the
charge current gradually decreases to the set current. The charger
will automatically switch from charging mode to trickle mode.
Indicates that charging is complete. You can also continue to
float.
Safety Tips:
1. It is strictly prohibited to use in damp,high
temperature,flammable,explosive objects gas environments.
2. It is strictly prohibited to use this machine in a state where
the cooling air hole of the machine is blocked or the fan is
damaged and stopped.
3. It is strictly prohibited to charge scrapped,non lead-acid
batteries,or batteries without voltage! Do not charge non
chargeable batteries! Do not approach open flames while charging!
There is high voltage inside the machine and unauthorized
disassembly is strictly prohibited.
4. For indoor use, beware of rain. During the charging
process,someone must take care of the charger, and it is strictly
prohibited to cover it. It must be placed in a well ventilated area
for use. It is strictly prohibited to charged in or on a
vehicle,and be cautious of flames,sparks,and explosive gases to
avoid causing a fire.
5. To charge the battery of the vehicle or equipment, please remove
the battery and place it in a safe and flammable environment.
Otherwise, if an accident occurs, you will be held responsible.
6. There is high voltage and danger inside the charger. Non
professional personnel are strictly prohibited from opening or
modifying the machine, otherwise the consequences will be borne by
oneself.
7. If the power input cord is damaged, to avoid danger, it must be
replaced by the manufacturer, maintenance department, or similar
professional personnel.
Before connecting or disconnecting the battery charger from the
battery,the power should be disconnected first.
Function:
Lithium battery: Specially set for charging three strings of 12.6V lithium
batteries. The 12V lithium battery has a full charge voltage of
12.6V. It is forbidden to charge lithium batteries or faulty
batteries of other specifications.
Ordinary battery: For the ordinary battery charging file(12V24V battery automatic
recognition), it can charge12V,24V battery. When selecting the
ordinary battery intelligent charging mode, when charging the 12V
battery, the full voltage is 14.2V±0.2V, and the full voltage value
for charging the 24V battery is 29.2V±0.4V.
Start-stop battery:For the start-stop battery file(12V24V battery automatic
identification), it can charge 12V,24V battery, when selecting
start-stop battery intelligent charging mode, charge the 12V
battery, the full charge voltage is 14.6V±0.2V, and the full
voltage value of the battery is 29.2V±0.4V.
Technical Parameters:
Rated input voltage range:110V-250V
Output voltage:12V/24V
Rated operating frequency:50/60HZ
Full load conversion efficiency:93%
Operating temperature range:-30°C-45°C
Charging mode:No load - constant current-constant pressure - float
charge - trickle
FAQ:
Q: Why is the current getting smaller and smaller?The current is
not 30A.
A: Charging principle: pulse. Pulse can protect the battery and
prolong its service life.
The difference is that the pulse charger can keep the charging
process dynamic, balance the charging and discharging process,
reduce the water loss during the charging process, and prevent the
problem of sulfation, so that the battery capacity can be restored
and the battery life will be increased.
Pulse is not a constant voltage and current. It will match the
charging voltage and current according to the battery status. The
charging current will become smaller and smaller as the battery
power increases.
The pulse is designed to better protect the battery from being
injured due to overcharge.
Not all batteries can reach the peak current. If the battery
capacity is large and the power loss is severe, the current will be
higher.
Q: Are 12V/24V and lithium battery automatically compatible?
A: 1. Manual selection is required; 2. 12V/24V self-defined
identification, lead-acid battery, water battery, dry battery. 3.
Lithium battery: 12V, lithium iron phosphate battery cannot be
charged (it depends on whether the charger supports 12.6V lithium
battery)
Q: How to operate?
A: The first step is to check whether the battery is good or bad.
Operation method: the charger is not plugged in, just clip the
charger clip to the positive and negative poles of the battery. The
display will show the current internal pressure of the battery.
There are two conditions not shown: 1. Charger problem 2. Battery
voltage is lower than 8V.
The second step is that the charger has normal input and output.
Only plug in, and the display will be on. By default, 12V and POWER
are on. When the red and black clips meet, the spark charger is
completely normal.
Q:What is the differences between chargers?
A:1. Make sure what type of battery needs to be charged.
2.Different power sizes affect the charging time of the charger.
Q: What is the function of the charger?
A:1. Check the internal pressure of the battery; 2. Repair; 3.
Charging.
Q: Why can't the battery reach the current you said?
A: Generally, the battery capacity is not large enough to give all
the output current to the battery. I'm afraid that the battery
can't bear it, which will make the battery damage.
P. S. Most of the batteries that need to be recharged with chargers
have some problems
Q: Why cant the two 12V series connection recognize 24V for
charging?
A: If the battery is a combination of two 12V batteries and can not
directly identify the 24V charging, the internal pressure of the
two batteries can be detected separately, and the large difference
is unrecognizable. Two 12V batteries need to be charged separately
Q: Why does the display screen not light after plugging in?
A: 1.Plug in only, the display screen is not on, and the indicator
light is not on. The safety tube is burnt and the product is
defective
1. The 12V and power indicators are on. It may be that the display
cable is loose. Maybe the display screen is broken