Home Companies Shenzhen Hunt Electronics Co., Ltd

MR-JE-10B Mitsubishi JE Series 100W Servo Amplifier Model MR-JE-B AC servo drive 3-phase or 1-phase 200 VAC to 240 VAC

Shenzhen Hunt Electronics Co., Ltd
Active Member

Contact Us

[China] country

Address: 24/25F, Building 13, Xingfucheng, Qingquan Road, Longhua District, Shenzhen, China

Contact name:Nicole Tang

Inquir Now

Shenzhen Hunt Electronics Co., Ltd

MR-JE-10B Mitsubishi JE Series 100W Servo Amplifier Model MR-JE-B AC servo drive 3-phase or 1-phase 200 VAC to 240 VAC

Country/Region china
City & Province shenzhen guangdong
Categories Solar Chargers
InquireNow

Product Details

MR-JE-10B Mitsubishi JE Series 100W Servo Amplifier Model MR-JE-B AC servo drive 3-phase or 1-phase 200 VAC to 240 VAC
 
 

Combinations of Servo Amplifier and Servo Motor

AmplifierServo MotorStocked Item
 HG-KN SeriesHG-SN Series 
MR-JE-10B/MR-JE-10AHG-KN13J-S
MR-JE-20B/MR-JE-20AHG-KN23J-S
MR-JE-40B/MR-JE-40AHG-KN43J-S
MR-JE-70B/MR-JE-70AHG-KN73JHG-SN52JS
MR-JE-100B/MR-JE-100A-HG-SN102JS
MR-JE-200B/MR-JE-200A-HG-SN152J
HG-SN202J
S
MR-JE-300B/MR-JE-300A-HG-SN302JS

 

MR-JE-B (SSCNET III/H Interface) Specifications

Servo Amplifier Model MR-JE-10B20B40B70B100B200B300B
Stocked ItemSSSSSSS
OutputRated Voltage3-phase 170 VAC
Rated Current (A)1.11.52.85.86.011.011.0
Power Supply InputVoltage/Frequency (*1)3-phase or 1-phase 200 VAC to 240 VAC, 50 Hz/60 Hz3-phase or 1-phase 200 VAC to 240 VAC, 50 Hz/60 Hz (*8)3-phase 200 VAC to 240 VAC,
50 Hz/60 Hz
Rated Current (A) (*7)0.91.52.63.85.010.514.0
Permissible Voltage Fluctuation3-phase or 1-phase 170 VAC to 264 VAC3-phase or 1-phase
170 VAC to 264 VAC (*8)
3-phase 170 VAC to 264 VAC
Permissible Frequency Fluctuation±5% maximum
Interface Power Supply24 VDC ± 10% (required current capacity: 0.1 A)
Control MethodSine-wave PWM control/current control method
Tolerable Regenerative Power of the Built-In Regenerative Resistor (W)
(*2, *3)
--102020100100
Dynamic BrakeBuilt-in (*4)
SSCNET III/H Command Communication Cycle (*6)0.444 ms, 0.888 ms
Communication FunctionUSB: Connect a personal computer (MR Configurator2 compatible)
Servo FunctionAdvanced vibration suppression control II, adaptive filter II, robust filter, auto tuning, one-touch tuning, tough drive function, drive recorder function, tightening & press-fit function, machine diagnosis function, power monitoring function, lost motion compensation function
Protective FunctionsOvercurrent shut-off, regenerative overvoltage shut-off, overload shut-off (electronic thermal), servo motor overheat protection, encoder error protection, regenerative error protection, undervoltage protection, instantaneous power failure protection, overspeed protection, error excessive protection, hotline forced stop function (*9)
Compliance to StandardsEN 61800-3, EN 61800-5-1, RoHS compliant, UL: UL 508C, KC compliant
Structure (IP Rating)Natural cooling, open (IP20)Force cooling, open (IP20)
Close Mounting (*5)3-Phase Power Supply InputPossible
1-Phase Power Supply InputPossibleNot possible-
EnvironmentAmbient Temperature0 °C to 55 °C (non-freezing), storage: -20 °C to 65 °C (non-freezing)
Ambient HumidityOperation/Storage: 90 %RH maximum (non-condensing)
AmbienceIndoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist or dust
Altitude1000 m or less above sea level
Vibration Resistance5.9 m/s² at 10 Hz to 55 Hz (directions of X, Y and Z axes)
Weight (kg)0.80.80.81.51.52.12.1
Notes:
1. Rated output and speed of a servo motor are applicable when the servo amplifier, combined with the servo motor, is operated within the specified power supply voltage and frequency.
2. Select the most suitable regenerative option for your system with our capacity selection software.
3. Refer to "Regenerative Option" in this catalog for the tolerable regenerative power [W] when regenerative option is used.
4. When using the built-in dynamic brake, refer to "MR-JE-_B Servo Amplifier Instruction Manual" for the permissible load to motor inertia ratio.
5. When the servo amplifiers are closely mounted, keep the ambient temperature within 0 °C to 45 °C, or use them with 75% or less of the effective load ratio.
6. The command communication cycle depends on the controller specifications and the number of axes connected.
7. This value is applicable when a 3-phase power supply is used.
8. When a 1-phase 200 V AC to 240 V AC power supply is used, use the servo amplifiers with 75% or less of the effective load ratio.
9. When an alarm occurs on MR-JE-B servo amplifier, the hot line forced stop signal will be sent to other servo amplifiers through a controller, and all the servo motors that are operated normally by MR-JE-B servo amplifiers decelerate to a stop. Refer to "MR-JE-_B Servo Amplifier Instruction Manual" for details.

 
 
 
Shenzhen Hunt Electronics Co., Ltd.Always be here offer you the best price and good after-sales services.
Our advantage range:
1. Mitsubishi A,Q,L, FX-series PLC;
2. Mitsubishi Frequency Inverter FR-A700, FR-E700, FR-F700, FR-D700-series. /

3. Mitsubishi HMI(Human Machine Interface) GT16, GT15, GT12, GT10-series
4. Mitsubishi servo drive J4, J3, J2S,JE series
 
FAQ:
1. Q: Does all products are original?
Yes, we dealed are all brand new and original products.
2. Q: How about the warranty?
We supply 1 year warranty
3. Q: What about delivery time?
Normally 1-3days
4. Q: How about the payment term?
T/T, Western union are welcome
Contact us:
Company name: Shenzhen Hunt Electronics co., Ltd.
Website: http://www.hunt-plc.com
TEL: 0086-755-21002862
Skype: nicole.tang_7
Email: nicole@huntplc.com






























Hot Products

Mitsubishi GOT 2000 GT2308-VTBD GOT2000 8.4" TFT Touch Screen HMI, Colour, 640 x 480pixels, 303 x 56 ...
GT2712-STBA Mitsubishi GOT2000 12.1" TFT LCD Touch-Screen HMI Display, Colour, 800 x 600pixels, 246 ...
Mitsubishi GOT 1000 GT1265-VNBA Product Specifications Part Number: GT1265-VNBA Series: GOT 1000 ...
Mitsubishi GOT 1000 GT1265-VNBD Product Specifications Part Number: GT1265-VNBD Series: GOT 1000 ...
Mitsubishi GOT 2000 GT2308-VTBD Product Specifications Part Number: GT2308-VTBD Series: GOT 2000 ...
GT2508-VTBD New Mitsubishi 8.4 in TFT Touch Screen HMI, Colour, 640 x 480pixels, 241 x 52 x 194 mm ...