|
[China]
Trade Verify
Address: NO.298th of ZHONGHUA NORTH STREET,SHIJIAZHUANG CITY,CHINA.
Contact name:Maple
HUATAO LOVER LTD |
|
Verified Suppliers
|
|
|
0.5-5.0m/S Flow Limit Rotating Concentration Transmitter For Paper Pulp
Rotating concentration transmitters can be used for many different variations using different components. It is suitable for all stages of the entire pulping process, from the blow-off line after the digester, to the screening and cleaning stages, even the bleaching workshop, until entering the pulp tank stage before the paper machine, etc.
| Product name | Rotating Concentration Transmitter |
| Model | RC81 |
| Repeatability | 0.01%Cs |
| Contact medium part material | Stainless steel |
| Flow limit | 0.1 to 5m/s (0.3 to 16.1fps) |
| Sensitivity | Better than ±0.005% |
| Ambient temperature | Up to 60°C (140F) |
| Precision | 0.01%Cs |
| Motor | 3-phase 380VAC, 370W, IP54 |
| Advantages | 1. High measurement accuracy and repeatability 2. Minimum flow in a large flow range 3. Robust design provides high durability and minimal maintenance 4. Simple structures, can be repaired on site 5. The sensor is fully protected by the converter 6. Complete recording of calibration and transmitter settings via flash memory card 7. Simple installation - low installation cost |
1. Liquid crystal display, which can realize multi-point, parabolic
calibration and easy to operate calibration;
2. Signal damping and filtering are very low, signal to noise ratio
is high, and has high precision;
3. Not affected by pulp, fiber type, freeness, Kappa number, flow
rate, pressure, etc.;
4. It is little affected by pH and temperature, and the temperature
can be compensated;
5. Unaffected by pressure, air bubbles, and electrical
conductivity;
6. Fast response, short reaction time and control dead time, and
good controllability;
7. It can be installed on horizontal, vertical, or inclined pipes.
The sensor shaft should be horizontal and the motor should be under
the sensor.
1. Your inquiry regard to our product will be replied within
24hours
2. Well-trained & experienced staff are to answer all your
inquiries in English
3. OEM&ODM projects are highly welcomed. We have strong R&D
team here to help
4. Your business relationship with us will be confidential to any
third party
