|
[China]
Trade Verify
Address: Zhengzhou ,Henan Province ,China.
Contact name:Harvey
Henan HTX Group Co., Ltd. |
|
Verified Suppliers
|
|
|
Concrete Sandstone Retaining Wall Machine Road Edge Stone Making Machine
A machine specifically designed for making road edge stones is commonly known as a road edge stone making machine or a road curbstone machine. These machines are used to produce concrete or cement-based curbstones that are used as edges or boundaries along roads, walkways, driveways, and other paved surfaces. Here is a general overview of how a road edge stone making machine works:The machine typically requires a concrete or cement mixture as the raw material. This mixture consists of cement, aggregates (such as sand, gravel, or crushed stone), water, and additives. The specific mix design may vary depending on the desired strength and appearance of the road edge stones.The machine is equipped with specialized moulds that determine the shape and dimensions of the road edge stones. These moulds can be customized according to specific requirements, including the desired profile, texture, and design of the edge stones.The prepared concrete or cement mixture is poured into the machine's hopper or feeding system. The machine then transfers the mixture to the moulds, ensuring that it fills all the desired areas and details of the moulds.Once the moulds are filled with the concrete mixture, the machine applies compaction pressure to compress the concrete and ensure proper density and strength. This can be achieved through hydraulic or mechanical systems.Once the road edge stones have cured sufficiently, the machine demolds or releases them from the moulds. Care should be taken during demoulding to avoid damaging the concrete.
It's important to note that specific features and capabilities of road edge stone making machines can vary among manufacturers. It is recommended to consult with reputable suppliers or manufacturers specializing in concrete product manufacturing machinery to determine the most suitable machine for your specific needs.
Specification:
| Name | Model | Specification | Size(mm) | Power(Kw) | Capacity(m2/day) | Weight(Kg) |
| Wet Cast Machinery | HTX-P-01 | Hydraulic driving;Auto feeding; vibrating and timing feeding | 7000*1000*1800 | 12.7 | 1000-1500 | 2000 |
| Wet Cast Machinery | HTX-P-02 | Chain drived;Auto feeding,auto vibration | 8000*1100*1600 | 4.05 | 800-1000 | 1500 |
Applications
Wet cast machinery, is suitable for different silicone molds,
rubber molds and plastic molds, size range from 200*200mm to
1500*1500mm, available for producing the artificial stone both for
paving tile molds, 3D wall molds, wall panel molds, roadside stone
molds, retaining wall molds, wall cap molds, etc.
Support and Services
Wet Cast Machinery technical support and services include:
