Home Companies Shenzhen Ariza Electronic Co.,Ltd.

Independence Wireless Fire Smoke And Carbon Monoxide Detector Alarm 2 In 1 Detector Sensor With ABS Material

Active Member

Contact Us

[China]

Address: The 2nd floor of B1 building,Xinfu industry zone,Chongqing Rd.,Heping village,Fuyong Town,Bao'an district,Shenzhen,China 518103

Contact name:Alisa

Shenzhen Ariza Electronic Co.,Ltd.

Independence Wireless Fire Smoke And Carbon Monoxide Detector Alarm 2 In 1 Detector Sensor With ABS Material

Country/Region	china
City & Province	shenzhen chongqing
Categories	Smoke Detector

Product Details

Independence Wireless Fire Smoke And Carbon Monoxide Detector Alarm 2 In 1 Detector Sensor With ABS Material

Products Description

2-IN-1 PROTECTION: Equipped with both photoelectric and electrochemical CO sensors that work independently of each other; instantly notifies you when dangerous smoke or CO concentration is detected while minimizing false alarms; provides the ultimate protection from 2 deadly threats, all contained in 1 unit

BUILT-IN 3-YEAR BATTERY: Provides 3 years of continuous power with a built-in Alkaline battery, saving on energy while remaining eco-friendly; Easy to replace the battery

ACCURATE, RELIABLE & HIGHLY SENSITIVE: The ARIZA combination smoke and co alarm has been redesigned from the inside out; it will ensure that smoke triggers the alarm instead of interference by taking 3 separate smoke samples from the surrounding air; a full 360° ring of air intakes ensures complete detection with no blind spots

Sepcification

Product name	Independence Wireless Fire Smoke And Carbon Monoxide Detector Alarm 2 In 1 Detector Sensor With ABS Material
Battery Package	Alkaline (LR6, MN1500) or Carbon Zinc battery (R6P)
Battery Life	3 years
Power	DC 2*1.5V AA Alkaline or Carbon Zinc battery
Smoke Sensitivity	0.09-0.17 dB/m
CO sensitivity	50ppm 60-90min /100ppm 10-40min / 300ppm ≤ 3min
Silence Time	approx. 10 minutes
Low Battery	2.6 ±0.1v
Comply to Standard 1	EN14604:2005/AC:2008 (for smoke detector)
Comply to Standard 2	EN50291:2010 (for carbon monoxide detector)

Where to install

At first you should install an alarm in the bedroom and walkway. If there are several bedrooms in the house, please install an alarm in every bedroom.
Install an glarm above the stairway and on every floor of the house.
Smoke, heat and burning things will spread horizontally after rising to the ceiling, so install the alarm in middle of the ceiling.
If the alarm can not be installed in the middle of the ceiling, install it keeping 300mm away from the corners .
If the alarm is installed in the wall, it should keep 100mm away from the ceiling.
If the length of the room or the hall is beyond 30 foot, you need to install several alarms there.
When the wall or ceiling is slanting, the alarm needs to be installec minimum 500mm away from the highest wall or ceiling point in the room.

Locations to Avoid

High-humidity areas such as kitchens, and bathrooms;
Next to air outlets, fans and central heating;
Dusty, dirty areas or areas with insects;
High-temperature and easily polluted places;
Places with difficult access, making it difficult to operate the test function;
Within 1.5m from lamps;
Next to doors or windows;
In the top of rooms with sloping roofs, the corner of the room or other dead-air spaces.

Mounting Alarms

1. Twist off the mounting bracket from the alarm;
2. Put the bracket on the installation position and mark the screw holes on the ceiling or the wall;
3. Drill two mounting holes in the marked place by an electric drill (The diameter of the drill hole is 5mm) and insert two plastic anchor plugs by hammer;
4. Screw the mounting bracket to the ceiling or the wall;
5. Attach the alarm to the mounting bracket and turn clockwise to lock the alarm;
6. If you have any question on installation, please contact your retailer.

Packing List

1 × smoke and carbon monoxide alarm
1 × Mounting bracket
1 × Screw Kit
1 × User manual

FAQ

Q:How about the quality of Smoke And Carbon Monoxide Detector Alarm?
A :We produce every product with good quality materials and fully test three times before shippment. What is more, our quality areapproved by CE RoHS SGS & FCC, IOS9001, BSCI.

Q: Can i have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q: What is the lead time?
A: Sample needs 1 working days, mass production needs 5-15 working days depends on order quantity.

Q: Do you offer OEM service, like make our own package and logo printing?
A: Yes, we support OEM service, including customizing boxes, manual with your language and printing logo on the product etc.

Q: Can I put order with PayPal for a fast shipment?
A: Sure, we support both alibaba online orders and Paypal, T/T, Western Union offline orders. Please contact us for details.

Q: How do you ship the goods and how long does it take arrive?
A:We usually ship by DHL(3-5days), UPS(4-6days), Fedex(4-6days), TNT(4-6days), Air(7-10days), or by sea(25-30days)at your request.