Building Waterproof PSA Hot Melt Rubber Adhesive For Mouse Trap

Building Waterproof PSA Hot Melt Rubber Adhesive For Mouse Trap

SUGGESTED USES
The construction adhesive for nonwoven disposable applications.

OPERATING GUIDES
The material can be applied by all types of spray and slot applicators. Suggested operation temperature is 140 –
170 ℃ for both, depending on machines, substrates, and plant conditions.

FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation of 21 CFR 175.105, “Adhesives”.
PACKAGE
1kg sausage wrapped with meltable film, 25kg/box.
Please consult the sales representative for special requirements.

SUGGEST

Usage:

1. Recommended operating temperature: 140°C-175°C

2. If there is carbon remaining in the rubber box or rubber pipe, you can consult the manufacturer or you can make a clean out with the help of clean mineral oil under 120°C.
3. When coating, the viscosity can be adjusted by temperature.
4. It is unacceptable to mix it with other types of hot melt adhesive.
5. After filling up the hot melt adhesive slot, please close the lid of rubber slot in case of pollution from external impurities.

Clean:

Please keep the equipment clean; clear the adhesive melting box regularly. Control the temperature of the adhesive melting box under 150°C when clearing it. Empty all remaining adhesive before adding new adhesive. Turn off the machine when not using it.
Safety:

Because of the high running temperature, please wear protective clothes, eyeshade, and glove when working.
Noted:

This test result is given by our company test method and equipment. Different test method may cause the result a little different. So in order not to cause unexpected loss, we suggest that you make a test before using the product.

More about Jaour