|
[China]
Trade Verify
Address: No.3077 Liuxiang Road, Jiading District,Shanghai 201818, P.R.China
Contact name:
Shanghai Jaour Adhesive Products Co.,Ltd |
|
Verified Suppliers
|
|
|
Elastic Bandage Application Hot Melt Pressure Sensitive Industrial Adhesive For Paper Tape
DESCRIPTION
The JaourTak this kind glue is a synthetic rubber based hot
melt pressure sensitive adhesive specifically developed for
medical tapes, plasters and bandages applications. The product is
featured high tack and peel, high shear, and
good ageing performance.
| Product name: | Rubber Based Pressure Sensitive Hot Melt Adhesives For paper tape |
| Appearance: | 100% Solid in transparent light yellow color |
| Components: | Thermoplastic Polymer |
| Application: | labels and tapes |
| Packing & Storage | Paper carton packing, 1.04kg/pc, 25Kgs/carton. Stored in a cool and dry place, storage period is two years. |
SUGGESTED USES
Medical tapes, plasters and bandages to various substrates, wound
dressing.
Other pressure sensitive adhesive applications that high bond
strength and tack, high shear are required.
TYPICAL PROPERTIES
Appearance : Light yellow translucent solid
Color (Gardner) : ≤ G5
Softening Point (R&B) : approx. 109±5℃
Viscosity (Brookfield) : @120℃ approx. 99.000±1000 cps
OPERATING GUIDES
The material can be applied by slot or roll coating applicators.
Suggested operation temperature is 150 – 180 ℃
for both, depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation
of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper,
25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months,
from the date of manufacture, in its original
packages under dry and clean conditions at ambient temperature
below 35 0 C and above 5 0 C.
Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The
material is applied hot. Appropriate personal
protective clothing and eye protection are strongly recommended to
prevent burns. Adequate ventilation is
suggested to remove any vapors or fumes generated. Rotate stocks
and using the oldest stock first.
