Shenzhen Tunsing Plastic Products Co., Ltd. |
Verified Suppliers
|
|
54 Shore A For Laminating Fabric Seamless Tpu Hot Melt Adhesive Film
Composition:
TPU
Tpu Hot Melt Adhesive Film Description:
1. Polyurethane is a thermoplastic hot-melt adhesive film.
2. Polyurethane hot melt film is entrusted to release paper and can be repeatedly heated and plasticized.
3. Tpu hot-melt adhesive adheres to the soft touch of Lycra,
spandex, nylon, Jiaji and other super-elastic fabrics. Its
characteristics are: very soft feel, super high resilience.
Polyurethane Hot Melt Adhesive Film Applications:
DS3412 is used to bond one-piece underwear and seamless underwear
and soft fabric such lycra
Tpu hot melt film Physical Characteristics:
Liquidity Index | 6±3g/10mins |
Melt range | 102-125℃ |
Hardness | 52±2 (Shore A) |
Conventional Thickness | 0.05mm |
Tpu hot melt film free sample:
We can provide you 1-3 yards free sample of each model too test only you pay the freight.
Consumer Feedback:
Contact us:
Whatapps:+8618126266195
Email:ts05@tunsing.com.cn
Delivery and Packing:
1380mm/roll,1roll/carton
After we receive the payment within 3-7 working days
Notice:
1. Bonding temperature and pressure and time relate to the bonding strength of the film to the material. The bonding temperature must be close to the temperature set by the machine, the pressure must be uniform, and the mold and press rolls must be flat.
2. The bonding conditions used will vary between machines and materials. The conditions indicated here are only basic. The most ideal bonding conditions should be established by manufacturing for the specific application.
Note: The seller hereby declares that Tunsing will refuse to accept the assurance of the components of the manufacturing process.
FAQ:
1 . How about hot melt adhesive film?
A: It is just a film, and the basic material is release
paper. But the film is solid in room temperature, when reach its
melt point,it is able to bond other materials, Different materials
of hot melt adhesive film have different performances and different
usages, we need understand your demands,then recommend you right
products to you.
2. Do you accept OEM or ODM?
Yes ,we accept OEM and ODM,we are professional heat transfer
material manufacturer ,having more than 10years experience.able to
assist you R&D new products. So if you need bonding some
special materials, please don’t hesitate to let us konw.
3. May I have your samples?
If you need some sample for reference,please let us know your fully
address/ship
mode with courier,and we will arrange sample for your reference.
4. How long is the lead time?
Sample lead time:3-7 days
Bulk lead time:7-10 days(depends on order quantity)