Negtive Pressure Glass Bottle Filling Machine For Concentrate Preparation Juice

Small Scale Apple Juice Filling Machine / Glass Bottling Line

Quick detail

Description

1). The raw water will be purified and sterilized after passing through the water treatment system, and will be stored in the purified water storage tank;

2). The juice will be prepared by the juice preparation system, the prepared juice is stored in the insulation tank (for heat preservation) temporarily;

3). Automatic heat resistance PET bottle blow molding machine is connected with the water filling machine by the Air conveyor;

4). Prepared juice will be pumped into the juice filling machine; At the same time, empty bottles pass through the rinsing, filling and capping 3-in-1 monoblock, the bottles will be rinsed, filled and capped.

5). Bottled water goes out from the water filling machine and will be transferred to the bottle over-turn sterilizing machine, the cap and the bottle mouth will be sterilized after passing through the sterilizing machine, then the bottles will be transferred to the bottle cooling machine;

6). The bottles are getting dried after passing through the blowing dryer, and the dried bottle will go to the labeling machine and PE film shrink wrapping machine;

7). The packed bottle water will come out from the PE film shrink wrapping machine.

Samples : Project: 4500BPH Juice production line (machine list)

1, Juice filling system

2, Packing system

More photos