JiangSu DaLongKai Technology Co., Ltd |
Verified Suppliers
|
|
Open Style Feed Box MS-630 , Scrap Metal Shear PLC Control With Hydraulic Drive
Introduction
Gantry Plate Shear sheet shear machine is suitable for
steelmills metal recycling and processing industry and nonferrous
metal, ferrous smelting industry, all kinds of steel and
sheet metal, scrap metal part to cold cut into required size,
specification to save transportation cost and improve efficiency of
smelting. The equipment design of fast, without any increase in
power of the motor, pump displacement condition, in (about 400
tons) under the shear rate maintained rapid, large shear materials
automatically converting speed.Recover the original shear force, so
as to improve the work efficiency nearly doubled.
Application
Thin metal, iron, cast iron, iron, sheet, thin material, steel, caigang watts, scrap steel, iron, aluminum alloy, channel steel, Angle steel, Angle iron, copper, metal plate, aluminum, scrap steel, aluminum, iron, steel, round steel, scrap metal.
Advantages
1. This equipment adopts hydraulic transmission, compared with the
mechanical drive type shear machine, has small volume, light
weight, small inertia, low noise, stable movement, convenient
operation, flexible, large shear plane, scissors, convenient
adjustment, the use of safe operation, easy to achieve overload
protection;
2. This equipment is designed for fast, without any increase in
power of the motor and pump displacement condition, in (about 250
tons) under shear speed fast, large shear material automatically
converting speed. Recover the original shear force, so as to
improve the work efficiency nearly doubled.
3. This equipment has the function of manual and automatic, convenient operation, simple control, scissors mouth work in any position in the process of starting cut and stop, and can according to the size of the cut materials, arbitrary control cut the size of the mouth, in order to obtain the highest working efficiency;
Technical Specifications | Remark | |||||
Shear cylinder
| model | YG340/220-750 |
2 sets
| |||
Nominal pressure | 3150*2KN | Trip
| 750MM
| |||
press cylinder | model | YG180/140-970 | 1 set | |||
Nominal pressure | 820*2KN | Trip | 970MM | |||
motor | model | Y225M-4 | Power | 45kw |
| |
speed
| 1480 R/MIN | Quantity | 3 sets | |||
oil pump | Model | 250YCY14-1B | Pressure | 31.5 mpa |
| |
Nominal output
| 250 ml / r | Quantity | 2 sets |