Active Member
|
[China]
Address: No. 1355 , Longgong South Road ,Chengdu Economic And Tech .& Dev. Zone , Sichuan ,China
Contact name:Mr Hermes Lei
CHENGDU ZK SEPARATION TECHNOLOGY CO., LTD. |
|
|
Palm Oil &Sludge Separating or Dewatering Decanter Centrifuge
Centrifuge Application scope
1) City tap water, domestic sludge dewatering;
2) Oil drilling mud dewatering;
3) Sludge Oil Recovery;
4) Refinery sludge concentrated dehydration;
5) Distiller ‘s grains dehydration;
6) Paper, printing and dyeing wastewater separation;
7) Medical sludge dewatering;
8) Soy protein dehydration;
9) Plant oil clarification and separation;
10) Cosmetic clarification and separation;
11) Bleaching powder separation.
12) Palm oil sludge Separating
Palm Oil Production Process:
LWS Series Three-phase Centrifuge corresponding to the Palm Oil Mill Capacity
| Palm oil mill capacity | Model of three-phase centrifuge | Handling capacity | Installed power |
| 15t/h | LWS350×1435CX | 5~8m3/h | 22+5.5 |
| 30t/h | LWS450×1845CX | 12~15m3/h | 30+11 |
| 45t/h | LWS520×2150CX | 18~25m3/h | 45+15 |
| 60t/h | LWS580×2400CX | 25~30m3/h | 75+18.5 |
| 80~90t/h | LWS650×2600CX | 32~35m3/h | 90+22 |
Two phase centrifuge specification
Model | Dia mm | Ratio | Speed rpm | G force | Main Motor kW | Back Motor kW | Capacity m3/h | Weight kg | Dimension (L×W×H)mm |
LW250×1025B | 250 | 4.1 | 5000 | 3500 | 7.5~11 | 3~4 | 1~3 | 1150 | 2300×750×1100 |
LW350×1435B | 350 | 4.1 | 4000 | 3136 | 15~22 | 4~5.5 | 3~6 | 2500 | 3400×900×1400 |
LW450×1845B | 450 | 4.1 | 3800 | 3640 | 30~37 | 7.5~11 | 6~10 | 4000 | 4500×1000×1400 |
LW500×2050B | 500 | 4.1 | 3500 | 3430 | 45~55 | 7.5~11 | 8~12 | 5000 | 4900×1200×1470 |
LW530×2173B | 530 | 4.1 | 3300 | 3232 | 55~75 | 11~18.5 | 10~15 | 5600 | 5100×1250×1500 |
LW585×2400B | 580 | 4.1 | 3000 | 2948 | 75~90 | 15~18.5 | 15~20 | 6500 | 5300×1300×1750 |
LW630×2583B | 630 | 4.1 | 3100 | 3390 | 90~110 | 18.5~22 | 30~45 | 7800 | 5100×1550×1400 |
LW720×2950B | 720 | 4.1 | 2200 | 1951 | 110~160 | 22~30 | 70~120 | 9000 | 6000×3250×1500 |
Three Phase Centrifuge Specification
Model | Dia mm | Ratio | Speed rpm | G force | Main Motor kW | Back Motor kW | Capacity m3/h | Weight kg | Dimension (L×W×H)mm |
LWS250×1025CX | 250 | 4.1 | 5000 | 3500 | 7.5~11 | 3~4 | 1~3 | 1150 | 2300×750×1100 |
LWS350×1435CX | 350 | 4.1 | 4000 | 3136 | 15~22 | 4~5.5 | 3~6 | 2500 | 3400×900×1400 |
LWS450×1845CX | 450 | 4.1 | 3800 | 3640 | 30~37 | 7.5~11 | 6~10 | 4000 | 4500×1000×1400 |
LWS500×2050CX | 500 | 4.1 | 3500 | 3430 | 45~55 | 7.5~11 | 8~12 | 5000 | 4900×1200×1470 |
LWS530×2173CX | 530 | 4.1 | 3300 | 3232 | 55~75 | 11~18.5 | 10~15 | 5600 | 5100×1250×1500 |
LWS585×2400CX | 580 | 4.1 | 3000 | 2948 | 75~90 | 15~18.5 | 15~20 | 6500 | 5300×1300×1750 |
LWS630×2583CX | 630 | 4.1 | 3000 | 3175 | 90~110 | 30 | 30~40 | 7800 | 5100×1550×1400 |
(1) Fresh fruit bunches are sent to preliminary pressing factory within 24h after harvest (mainly to prevent the increase of FFA);
(2) Heat the fruit bunches to 150℃ and keep the temperature for 85min to sterilize the fruits and boil out the stalks;
(3) Use winder - peeling machine to separate the fruits from bunches. Bunches can be used for combustion and fruits are introduced to silo;
(4) Send the fruits into screw press for high-pressure pressing. The pressed cake containing kernel (unbroken, containing palm kernel oil) is squeeze out from the machine head, and the liquid (mainly palm oil) is discharged from the liquid outlet of the presser;
(5) The liquid is discharged from the outlet to the 100m3 tank, and be heated by water (maximum 100°C). After standing, the upper raw palm oil in the tank is directly discharged into the three-phase disc centrifuge to be separated; and the lower water containing palm oil is separated in the three-phase centrifuge (oil+water+dreg);
(6) The palm oil separated in the three-phase centrifuge is returned to the 100m3 tank for standing and extraction of raw palm oil;
Features and Composition of Raw Palm Oil
