Oilfield Drilling Mud Linear Motion Shale Shaker Or Desander And Desilter Cones

Oilfield Drilling Mud Linear Motion Shale Shaker Solid Control Equipment

Product Specification:

The crochet screen with a quick-speed tighten bolt, obliquity-adjusting mechanical ratchet mechanism and patent-technology-based splatter shield made of high-strength cloth are used for convenient usage and clearly environment.

shale shaker can be used as a primary shale shaker and drying shaker for desander and desilter cones.The linear motion design with Adjustable high G force

ZS/Z-1 series linear vibrating screen for solid separation of drilling fluid makes use of two vibration motors with coordinate mass semi-diameter and takes a principle of self-synchronization to realize a linear movement of a screen box along a certain direction and achieve a goal of screening out and discharging rock debris particles in the drilling fluid.

ZS/Z-1 series vibrating screens comprise: common ZS/Z-1 linear vibrating screen, widened ZS/Z-1A linear vibrating screen, prolonged ZS/Z-1-4p linear vibrating screen with four screens, and double-linkage or triple-linkage vibrating screen set formed by combining the aforementioned vibrating screens.

Drilling fluid shale shaker is designed for drilling fluid solid control system of petroleum and gas drilling,and is the first-level equipment for liquid-solid separation of drilling fluid.

ZS/Z-1 Shale shaker Parameters: 

2.2 Environmental conditions

Ambient temperature: -20℃～+40℃

Ambient relative humidity: no more than 95%

Degree of explosion-proof: ExdⅡBT4

Corrosive environment: No corrosive gas or vapor that may damage metal and insulation

Degree of electrical protection: IP55

3 Safety specifications

3.1 Installation

A Use proper crane and lifting devices;

B Lifting the equipment beyond the designated lifting point is not allowed;

C Be sure that the installation platform is strong enough to bear sufficient weight;

D The equipment should be placed stably and tightly fixed on the tank level.

3.2 Operation

A Make sure the screen box fixing block is already dismounted and put in place before start-up of the equipment;

B. Do not touch the screen box and spring during operation;

C Stop the machine, find out the cause and correct it in case of any abnormal sound or vibration arising after start-up;

D Cut off the main power source after shut-down.

3.3 Maintenance

A Control box is only allowed to be opened with main power cut off;

B No adjustment of the eccentric block for vibrating motors;

C No drilling and welding on the screen box.

4 Components and overall dimension

ZS/Z-1 series linear vibrating screen is composed of a base, a vibrating screen, a slurry box, a dip angle adjusting device and an electric control system.

Customers can choose to buy base and feed pipe for double-connected shale shaker.

The screen box is mounted on the base through four springs, thus forming a typical “spring-mass” vibrating system.

The connection model and requirement to the double-linkage or triple-linkage vibrating screen set will be confirmed by negotiation.