|
[China]
Trade Verify
Address: 5.Room 307, Building A1, Gongming Songbai ZhongChuanghui, Guangming District, Shenzhen City, Guangdong Province
Contact name:Helen LI
Shenzhen Jinghongtai Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
JHOTA 5000W PV 500V Input AC 110/120V OutPut Match 48V battery Pure
Sine Wave Off-grid Inverter Optional Wifi Module
Quick Details:
1. MOQ: 5
2. Best choice for home energy storage
3. Warrenty: 3 Years
4. Rated Battery Input Voltage: 48V (Minimum Startup Voltage 44V)
5. Hybrid Charging Maximum Charging Current: 80A
6. Battery Voltage Range: 40Vdc~60Vdc ± 0.6Vdc
Description:
You can also stack multiple of these solar inverters together and use them for large scale off-grid applications. Such powerful features make this inverter one of the best off-grid solar inverters in the world.
This is a pure sine wave solar inverter that provides the highest quality power for your off grid applications.
If you want to avoid those constant power outages, an off-grid solar inverter is the best solution. They are the best option for rural areas without grid power.
Specification:
| Battery Input | |
| Battery type | Sealed,FLood,GEL,LFP,Ternary |
| Rated Battery Input Voltage | 48V(Minimum Startup Voltage 44V) |
| Hybrid Charging Maximum Charging Current | 80A |
| Battery Voltage Range | 40Vdc~60Vdc ± 0.6Vdc(Undervoltage Warning/Shutdown Voltage/Overvoltage Warning/Overvoltage Recovery...) |
| Solar Input | |
| Maximum PV Open-circuit Voltage | 500Vdc |
| PV Working Voltage Range | 120-500Vdc |
| MPPT Voltage Range | 120-450Vdc |
| Maximum PV Input Current | 18A |
| Maximum PV Input Power | 5200W |
| Maximum PV Charging Current | 80A |
| AC Input (generator/grid) | |
| Mains Maximum Charging Current | 60A |
| Rated Input Voltage | 220/230Vac |
| Input Voltage Range | UPS Mains Mode:(170Vac~280Vac)土2% APL Generator Mode:(90Vac-280Vac)±2% |
| Frequency | 50Hz / 60Hz (Automatic Detection) |
| Mains Charging Efficiency | >95% |
| Switch Time (bypass andinverter) | 10ms (Typical Value) |
| Maximum Bypass Overload Current | 40A |
| AC Output | |
| Output Voltage Waveform | Pure Sine Wave |
| Rated Output Voltage | 230(200/208/220/240Vac) |
| Rated Output Power | 5000(4350/4500/4800/5000VA) |
| Rated Output Power | 5000(4350/4500/4800/5000W) |
| Peak Power | 10000VA |
| On-load Motor Capacity | 4HP |
| Output Frequency Range(Hz) | 50Hz ± 0.3Hz / 60Hz ± 0.3Hz |
| Maximum Efficiency | >90% |
| No-load Loss | Non Energy-saving Mode: ≤50W Energy-saving Mode: ≤25W (Manual Setup) |
| General | |
| Certificate | CE(IEC62109-1) |
| EMC Certification Level | EN61000 |
| Working Temperature Range | -15°C ~ 55°C |
| Storage Temperature Range | -25°C ~ 60°C |
| Humidity Range | 5% to 95% (Conformal Coating Protection) |
| Dimensions | 426mm*322mm*126mm |
| Weight | 10.9 KG |
Installation Precautions
1. Tie conductors are selected based on no greater than 5A/mm2
current density.
2. The machine installed outdoors shall be protected against direct
sunlight and rain.
3. After the power switch is turned off, there is still high
voltage inside the all-in-one machine. Please do not open or touch
the internal components, and carry out relevant operation after the
capacitor is fully discharged.
4. Please do not install the all-in-one machine in a humid, greasy,
flammable, explosive or dusty or other severe environments.
5. The polarity of the battery input end of this product shall not
be reversed, otherwise the device may be damaged easily or there
may be some unpredictable dangers.
6. AC supply input and AC output are both high voltage, so please
do not touch the wires.
Product image:
