Active Member
|
[China]
Address: Block C, Huijin Square, Wuhou District, Chengdu, Sichuan, China
Contact name:Louis
Chengdu Tianhong Xinchuang Medical Technology Co., Ltd. |
|
|
Professional Automatic OLED Digital Screen Finger Pulse Oximeter Spo2 Measurement
Fingertip oximeter pulse oximeter, using infrared light technology, through the finger skin and musculoskeletal
tissue after the brightness of light, accurate detection of human blood oxygen saturation and pulse. Different
from blood collection test, high safety, no need to worry about blood infection, no pain; high precision, accuracy
fully comply with the EU CE standard. So, what are the features of the fingertip oximeter? Why not take a look!
Fingertip pulse oximeter has the following characteristics.
1, can monitor oxygen saturation, pulse parameters. And there is a
pulse pulse chart display.
2,Automatic shutdown function after about 8 seconds when there is
no signal.
3,Use two AAA batteries, low power consumption, the battery can be
used for 20 hours.
4,Low voltage alarm display.
5, the product is light, small size, easy to carry. Weight: 50g
(including 2 batteries); with lanyard: easy to hang
around the neck, but also 6, into the pocket.
7, easy to use, one key operation.
8,Have high accuracy and repeatability.
The above is the specific characteristics of the fingertip oximeter introduction. The fingertip oximeter is suitable
for people of all ages, including children children, adults, and the elderly. It is also necessary for normal people
to monitor their body condition at all times; if you, or your family or friends, have any of the above mentioned
medical conditions, then it is even more important to have a fingertip pulse oximeter. It is not only easy to use,
but also safe and hassle-free, eliminating the tedium of waiting in line to check your body condition anytime and
anywhere.
SpO2 measurement range: 5%-99%
SpO2 accuracy 1: + 2 % in the range of 70 % -99%
+ 2% in the range of 70%-99%
Other scope is not defined
SpO2 Alarm range: Consistent with the display range, the set step
length is 1 %
Pulse cate range: 30 bpm-250 bpm
Pulse rate accuracy: 土1bpm
Pulse rate Alarm range: Consistent with the display range, the set
step length is 5bpm
Data update cycle: 0.25s-2s
SpO2 PR average: 8s
Pulse rate sound: PR tone
Peak Wavelength range: 500 nm-100nm
Maximum optical output power: 150 mW
Pulse rate display: Numeric
Display Specifications: four color OLED,0.96"
Power dissippanon: in normal measurement , less than 10 mA ,in
power off state,less than 50uA
Battery:DC 3V 2*AAA
Why use a oximeter to
measure blood oxygen
saturation?
OXYGEN SATURATION (SpO2), an important basic data of clinical medi-
cine, is an important indicator of
the state of OXYGEN in the body. The normal level of oxygen saturation in the blood (arteries) is not thought
to be lower than 94%, and a lower level is considered inadequate. Low oxygen saturation can lead to
dizziness, weakness and vomiting. In se- rious cases, it can be life-threa ening.
Our Advantages
1. We have been specializing in the production of medical products
line for more than 35 years.
2. Obtained the CE,510K,ROHS,REACH quality system certification and
has passed BSCI,ICS factory audit.
3. We strictly control the quality of raw materials and products in
the production process.
4. Built a mold design team with more than 10 years of experience.
Support OEM and ODM service.According to
customer requirements to develop and design the mold.
5. Advanced laboratory equipment, can carry out a variety of
experimental tests.
