|
[China]
Trade Verify
Address: zhenglu town, tianning district, changzhou city, JIangsu Province
Contact name:Lillian
Jiangsu Shengman Drying Equipment Engineering Co., Ltd |
|
Verified Suppliers
|
|
|
Descriptions
The machine adopts full sealing for it. All parts are made of
stainless steel. It is equipped with three grades of filter. The
filtered air is one hundred thousand grades. The cooling device of
wall is installed at the cylinder body. It makes the wall
temperature less than 80℃.Air sweeping device is installed inside
the drying tower. The product will not be burnt or deteriorated
even stays on the way. The collection rate of powder is raised
greatly. Moreover will not cause medicine mixed or wall
stick.
Principle
Basic Principle: high-speed centrifuge atomizing for the extract of
traditional Chinese medicine is an application of centrifuge
atomizing technique. It is an high-speed atomizing dryer. The
following problems are solved.
1. Raw material is stick to the wall and the rate of powder
collecting is low.
2. Because the staying time of raw material at wall is long, the
phenomenon of burnt and degeneration can be produced.
3. It is difficult to clean and can not meet the requirement of GMP
4.Low in output: Model LPG-150 atomizing centrifuge dryer can
process 50-60kg/h of raw material liquid. In view of this,
according to the properties and process requirements of the extract
of traditional Chinese medicine, our factory researched and
designed the special dryer for the extract of traditional Chinese
medicine and won items of china patent.It solves the historical
difficult problems in drying the extract of traditional Chinese
medicine.The color of dried raw material is good.The dried raw
material does not degenerate.It raises the economic benefit
greatly.
Features
Compared to ordinary LPG high-speed atomizing dryer,it has the
following features
(1). Adopted three-grade air filter,the inlet air is one hundred
thousand grade.
(2). Adopted wall cooling device,the temperature of inner wall will
be on more than 80℃.Even if raw material is stayed on the wall,it
will not be burnt
(3). Its whole volume is 3.5 times of standard LPG high-speed
atomizing dryer.
(4). Adopted quick washing device,it is can meet the requirements
of production for varieties if products.
(5). Adopted wet-dedusting,there is no powder dust out.It is in
conformity with the requirements of GMP.
(6). Adopted air sweeping device ,the clean effect is satisified.
(7). Equipped with two sets of atomizer and adopted frequency
inverter control.
(8). Adopted PLC control and display,and adapted frequency control.
(9). Equipped with washing device on request.
(10). Adopted the seal transport by dry air on request.
Technical parameters
| Spec | ZPG-5 | ZPG-10 | ZPG-25 | ZPG-50 | ZPG-100 | ZPG-150 | ZPG-200 |
| evaporation capacity (kg/h) | 5 | 10 | 25 | 50 | 100 | 150 | 200 |
| prosess amount of material liquid(kg/h) | 6-7 | 12-14 | 25-34 | 50-68 | 100-135 | 150-203 | 200-270 |
| output of finished product (kg/h) | 1-2 | 2-4 | 4.8-7.2 | 9.2-14 | 18.4-28 | 24-42 | 36.8-56.4 |
| solid content of material liquid(%) | 18-25 | ||||||
| moisture content of finished product | 3-5% | ||||||
| electric power(kw) | 36 | 45 | 63 | 99 | 153 | 204 | 246 |
| heat source | steam plus electricity | ||||||
| collecting method of product and efficiency | two-grade cyclone or one -grade cyclone and one -grade web-method dedusted of 95% | ||||||
| automatic control meters and instrument | indicator of temperature of air and humidity of air exhausttm | ||||||
| temperature of air inlet (℃) | 150-200 | ||||||
| temperature of air outlet (℃) | 80-100 | ||||||
Attention to order
1.Liquid name and property: solid contents (or water contents),
viscosity, surface tension and PH value.
2. Dry powder density residual water contents allowed, particle
size, and maximum temperature allowed.
3. Output: shift time daily.
4. Energy that can be supplied: steam pressure, electricity
properly, fuel of coal, oil and natural gas.
5. Control requirement: whether or not the inlet and outlet
temperatures should be controlled. Powder collection requirement:
whether it's necessary to use cloth bag filter and the requirement
of the environment of the exhausted gas.
6. Other special requirements.
FAQ
Q: How can I visit your factory?
A: Our company is in Changzhou city, and it is very near Shanghai
city. It takes about 1 hour to get to Changchou. Or we can even
visit you in Shnghai.
Q: What’s the quality of your products?
A: Our products come with best quality, and passed CE
certification. And exported to lots countries around the world,
such as Australia, Malaysia, Vietnam, Philippines, Korea, Brazil,
Argentina, Russia, South Africa, etc. You can rest assured with the
quality absolutely.
Q: What to do if the machine has a problem?
A: 24 hours timely response of mail and phone calls. If the parts
broken belong to non-artificial factors within 12 months, we offer
free replacement. If beyond 12 months, customers should bear the
freight back and forth and accessories cost.
Q: How long is the warranty of your equipment?
A: One year.
Q: What is your payment term?
A: Our usual payment term is: 30% TT in advance, 70% TT before
shipment. Other ways can also be received after we both sides
discussion and agreement.
Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai. If you request CIF,
please give us your delivery port, and we will give you CIF price.
