Jiangsu Shengman Drying Equipment Engineering Co., Ltd |
Verified Suppliers
|
|
220V-380V Macat Conical Rotary Vacuum Drying Machine for Crystal Material with one Year Warranty
Product Description
Hot medium is inlet jacket for drying, Heat exchange id done by the
inner wall contacts with damp material. After the material absorbs
heat, water is evaporated. The evaporated moisture and other gas is
exhausted from vacuum exhaust pipe by vacuum pump. In the tank it
is vacuum state and the rotary of tank makes thematerial overturn
continuously, so the drying speed is fast and drying intensity is
increased, and can achieve the purpose of uniform drying. It is a
new style dryer that combines mixing and drying together. It can be
used together with condenser and vacuum pump(If don’t need recover
solvent, condenser is not needed). The design is advanced, inner
structure is simple and easy to clean. Material can be discharged
completely and operation is simple. It can reduce the labor
intensity, and improve working environment. Material will rotate
with the rotary of tank, but there is no material stick on the
inner wall, so coefficient of heat transfer is high, drying
efficiency is high. It can not only save energy but also can dry
material uniformly. It is widely used for drying in pharmaceutical,
chemical, foodstuff, dyestuff industry and so on.
Principle
As a specialized company in drying industry, we supply hundred sets
to the customers every year. As for working medium, it may be
thermal oil or steam or hot water. For drying the adhesive raw
material, we have designed specially a stirring plate buffer for
you. The biggest may be 8000L. Let heat source (for example, low
pressure steam or thermal oil) pass through the sealed jacket. The
heat will be transmitted to raw material to be dried through inner
shell;Under driving of power, the tank is rotated slowly and the
raw material inside it is mixed continuously. The purpose of
reinforced drying can be realized; The raw material is under
vacuum. The drop of steam pressure makes the moisture (solvent) at
the surface of raw material reach the state of saturation and
evaporate. The solvent will be discharged through vacuum pump and
recovered in time. The inner moisture (solvent) of raw material
will infiltrate, evaporate and discharge continuously. The three
processes are carried out unceasingly and the purpose of drying can
berealized within a short time.
Technical parameters
Name | unit | 100 | 200 | 350 | 500 | 1000 | 2000 | 3000 | 4000 | 5000 |
Total volume | L | 100 | 200 | 350 | 500 | 1000 | 2000 | 3000 | 4000 | 5000 |
working volume | L | 50 | 100 | 175 | 250 | 500 | 1000 | 1500 | 2000 | 2500 |
heating area | ㎡ | 1.16 | 1.5 | 2 | 2.63 | 4.61 | 7.5 | 10.2 | 12.1 | 14.1 |
speed | rmp | 6 | 6 | 6 | 6 | 6 | 5 | 4 | 4 | 4 |
power | kw | 0.75 | 1.1 | 1.5 | 1.5 | 3 | 4 | 5.5 | 7.5 | 7.5 |
rotating height | mm | 1810 | 1910 | 2090 | 2195 | 2665 | 3055 | 3530 | 3800 | 4180 |
total weight | kg | 825 | 1050 | 1350 | 1650 | 2070 | 3000 | 4500 | 5350 | 6000 |
Applications
The machine is suitable for vacuum mixing and drying of powder and
granule raw materials of pharmaceutical industry, chemical
industry, foodstuff industry etc. Particularly it is suitable for
raw materials that have the follow requirements:
1. Thermal sentitive raw materials that cannot be dried at high
temperature.
2. Raw materials that is easy to oxidize and dangerous.
3. Raw materials that solvent and toxic gases are needed to
recover.
4. Raw materials that have special requirements for crystal shape.
5. Raw materials that have special requirements for the content of
residual volatile.
Pre-service:
As a good and rich experience supplier, we should offer customer
the best quality and best price of the machine.
1. Introduce the suitable product to the customer in detail, answer
the question raised by customer carefully.
2. Make the suitabe project as the customer requirement and make
sure the machine is suitable for the material.
Sale service:
(1). Ensure product with high quality and pre-commissioning before
delivery. (2). Delivery on time. (3). Provide full set of documents as customer’s requirements.
After-sale service:
Provide considerate services to minimize clients’ worries.
1. Assist clients to prepare for the first construction scheme.
2. Install and debug the equipment.
3. Train the first-line operators.
4. Examine the equipment.
5. Take initiative to eliminate the troubles rapidly.
6. Provide technical support.
7. Establish long-term and friendly relationship.
Service commitment:
1. Provide clients one-year warranty to make sure the machine work
well.
2. We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely.
3. Send every client a preferential quotation.