Home Companies Beijing HiYi Technology Co., Ltd

UV-DOAS H2S Sensor Biogas Monitoring System

Beijing HiYi Technology Co., Ltd

Contact Us

Trade Verify

Address: Room 1302,Yufei Building, 42 Dongzhimenwai Street, Dongcheng District, Postcode:100027 Beijing,China

Contact name:Lisa Niu

Inquir Now

Beijing HiYi Technology Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

UV-DOAS H2S Sensor Biogas Monitoring System

City & Province beijing beijing
Categories Energy Agents
InquireNow

Product Details

HY-3500UV Online UV-DOAS Biogas Monitoring System

OVERVIEW

 

HY-3500UV is the new generation biogas monitoring system that primarily designed based on UV-DOAS technology to measure H2S concentration precisely before and after H2S scrubber, and extended with modular sensor of CH4 (NDIR), CO2(NDIR) and O2 (ECD) to realize online continuously monitoring of biogas quality without purging cycle required.
The 2 sampling channels design before and after scrubber enable it to provide an ideal solution to guarantee the H2S scrubber efficiency, protect downstream expensive equipment from the damage of overload H2S, minimized the investment for users and optimized the biogas monitoring process.

 

FEATURES

 

• Unique technology of UV-DOAS, NDIR and ECD combination.
• High & low range H2S measurement, switchable for points before and after scrubber.
• UV-DOAS H2S sensor with higher precision and longer lifespan.
• Continuous monitoring on CH4, CO2, H2S, O2 for optimized process control.
• Modular sensor design enables easy calibration and maintenance.
• Flexible gas conditioning configuration customizable to site requirements.
• Stainless steel protective cabinet to avoid corrosion in long term operation.
• Optional Ex-proof design applicable to safe or hazardous area.

 

SPECIFICATION

 

Parameters
GasTechnologyMeasurement RangeResolutionPrecisionRepeatability
H2SUV-DOAS0-500~5000ppm1ppm±2%FS≤1%
CH4NDIR0-100%0.01%±2%FS≤1%
CO2NDIR0-50%0.01%±2%FS≤1%
O2ECD0-25%0.01%±2%FS≤1%
Response TimeT9060s
Gas Flow(0.7~1.2)L/min for measurement
Gas Pressure(2~50)kPa for measurement
Power SupplyAC220V, 50Hz
Sample Gas Preparation
Water RemoverGravity dewatering tank with manual draining valve (Default)
FilterGas/water separator with auto-draining valve (Default)
Sampling Channels1-4 sampling channels customizable (Optional)
Heated LineHeated line for ambient temperature under 0°C (Optional)
Sampling PumpSampling pump for low pressure condition (Optional)
Gas CoolerVortex gas cooler for high humidity sample gas (Optional)
Mechanical Specifications
EnclosureStainless Steel floor standing cabinet
Dimensions(mm)H1600 x W700 x D600
Ex-Proof GradeExdIICT6(Analyzer)
IP GradeIP65
Weight140kg
Communications
Analog4-20mA output channel for each gas reading
DigitalRS232/485 output with Modbus protocol
AlarmsHigh & Low alarm relay output for each gas reading
Environment Conditions
Operating Temperature(°C)-15°C to +45
Operating Humidity0-95%RH non-condensing
Environment Pressure80-120kPa
 

 

APPLICATION


Anaerobic Digester; H2S scrubber; Biogas Engine/CHP; Upgraded Bio-methane Gas; Landfill Site ;Waste Water Treatment; Biogas Flare

Hot Products

KANE458s Flue Gas Analyser with direct CO2, CO & over-range protection OVERVIEW Test domestic gas, ...
KANE 358 Flue Gas Analyser with CO sensor protection OVERVIEW KANE358 has a large 6 line display ...
KANE458s IAQ Indoor Air Quality Analyser FGA & IAQ Analyser measuring O2, CO & ambient CO2 OVERVIEW ...
KANE958 Commercial Analyser Flue Gas Analyser with direct CO O2 & CO sensor protection OVERVIEW ...
KANE988 Industrial Flue Gas Analyser With High Suction Pump FEATURES * Tests any boiler up to & over ...
KANE988+ Boiler Engine & A/C Refrigeration Analyser OVERVIEW Test any size boiler with high suction ...