Active Member
|
[China]
Address: No.106, north changjiang road, new district, wuxi china
Contact name:Jayson
Wuxi YBT Machinery Equipment Co.,Ltd. |
|
|
8-10m/min Galvanized Steel Octagon Pipe Roll Forming Machine With PLC Control
Description
Octagonal tube is an important accessory for roller shutter door. Like roller shutter slats and roller shutter door guide track, octagonal tubes can also be produced by metal roll forming machine with interlocked/self-lock seam. Main material can be roll formed are galvanized steel coils with 0.5-1.2mm thickness. Steel coils go through the process of decoiling, infeeding guiding, punching, roll forming, cutting and finally come out the finished octagonal tubes.
Rolling shutter door & windows Octagonal tube
Specifications:
| Configurations | Decoiling---Loading---Molding---Automatic cutting off---Discharging N.B: you can choose the Perforation machine and punching part as your demand. | |
| Material | Raw material | colored steel plate, galvanized plate, or aluminum plate |
| Thickness | 0.4 – 1.2 mm (As customer`s need) | |
| Feeding width | 500mm (According to customer`s profile) | |
| Material hardness: | 550 Mpa---350 Mpa | |
| Manual Uncoiler | Inner Diameter | 200-300mm |
| Max Coil width | 350mm | |
| Capacity | 5T | |
| Servo feeding and Punching part | Servo feeding power | 3kw |
| This part to punch the hole, you can change the dies to punch different holes. | ||
| Punching | 42T | |
| Die material | Gcr12MoV quenched | |
Main Forming machine | Forming steps | 20 stations ( Depend on Profiles ) |
| Shaft diameter | Φ50mm | |
| Shaft material | Quenched hardness 58-62 | |
| Design type | Middle plate welded | |
| Transmission | Chain box (Chain and gear box depend on thickness and customer`s need) | |
| Machine frame | 350# H steel welded; Steel plate welded/ Memorial arch frame type | |
| Roller material | Fine steel precision work processing of GCr15,Roller datum roller diameter φ120,Maximal roller diameter:φ200 | |
| Shaft material | 45# steel with tempering | |
| Cutting blade material | Gcr12MoV quenched | |
| Working speed | 8-10m/min | |
| Power of machine | 7.5KW (According to the thickness) | |
| Type of cutting | Pneumatic flying saw cutting off | |
| Cutting tolerance | 10m+/-0.5mm | |
| Material of blades | Cr12Mov, herd steel HRC 58-62℃ | |
| Cutter quantity | 1 set | |
| Working pressure | 20MPA | |
Other Spare part | Weight | About 12 ton |
| Dimension | 16000mmX1000mmX900mm | |
| Main body color | As required | |
| Voltage | 380v/50hz/3ph(or as required) | |
| Spare cutting blade | One piece | |
| Fuse | 2 pieces | |
| Relay | 2 pieces | |
| Travel switch | 2 pieces | |
| Solenoid valve | 1 pieces |
Features:
An octagon pipe roll forming machine is equipment that manufactures the octagonal axes of roundel for rolling shutter doors that is assembled by steel slats or metal sheet panels.
As an auxiliary equipment to rolling shutter door roll forming machines, the octagon pipe roll forming machine is not required as often as a slat or panel roll forming machine is, but it’s a necessary roll forming machine because all rolling shutter doors have to be pushed up or pulled down along the roundel, and the axe (octagon/octagonal pipe) is the core component on a roundel.
The raw materials for octagon pipe usually are galvanized steel or cold rolled steel of thickness 0.4-0.8mm and the widths depend on the required octagonal pipes or tubes that is used as the axes of rolling shutter roundels.
An octagon pipe roll forming machine usually consists of a manual decoiler, a pressing unit for holes, a roll forming unit, a cutting unit, control unit, and transmission unit. It can be running both automatically and manually under the PLC computer control system.
